Ok so first thing I need to know is what for fitting do I need to get from the TU bent tubing for the water line on the front of the head. Is this jic? If so what size? Also my plan is to go from that piece of tubing and build the rest out of AN fittings. My question is on the backside of the chra will 2 90 deg fittings get me up and over the chra toward the front?
Also the oil feed is 1/4 npt and the water fittings on the chra is 3/8 npt. And the water return on the back of the block is 1/4 npt. Does all this seem correct. From my searching this is what I gathered but I didn't see any pictures of the way the water lines are attached to the back side of the turbo. Thanks