Results 1 to 8 of 8

Thread: TBI Header w/ Custom 3" swing valve and 3" downpipe, can bring to Carlisle Sat. AM

  1. #1
    Garrett booster
    Join Date
    Mar 2008
    Location
    Harrisburg, PA
    Posts
    114

    TBI Header w/ Custom 3" swing valve and 3" downpipe, can bring to Carlisle Sat. AM

    Date: 04th July 2012
    Username: turboz523
    Full Name: Rob Springer
    City, State, Zip: Harrisburg, PA 17112
    Contact: rpspringer@hotmail.com 717-712-2375
    Price: $350/obo
    Description: I have a very ported tbi header w/ turbo flange welded on, along with custom 3" swingvalve and matching custom 3" downpipe for sale. Cylinder 4 has been tapped for an egt probe. I used this for a few years with a fwd perf. o/s valve ported head and super 60 turbo and ran high 11's @25psi. Its really an amazing header combination. I never used power steering with this combo so I'm not sure if it will clear the p/s or not. I had poly engine/trans. mounts and the turbo just barely cleared the firewall on my daytona, slight massaging may be necessary. I also made a custom drainback tube into the oil pan since the turbo sits a bit lower and blocked off the stock tube. I will be at Carlisle on Sat. morning and can bring this stuff with me if interested.
    Rob










  2. #2
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: TBI Header w/ Custom 3" swing valve and 3" downpipe, can bring to Carlisle Sat. A

    Damn good deal,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  3. #3
    Hybrid booster
    Join Date
    Nov 2008
    Location
    Lindenwold New Jersey
    Posts
    464

    Re: TBI Header w/ Custom 3" swing valve and 3" downpipe, can bring to Carlisle Sat. A

    Hey if this is still for sale after carlisle i would like to buy it. I cant make it to carlisle but during the eeek possible to meet you for pick up

  4. #4
    Garrett booster
    Join Date
    Mar 2008
    Location
    Harrisburg, PA
    Posts
    114

    Re: TBI Header w/ Custom 3" swing valve and 3" downpipe, can bring to Carlisle Sat. A

    I see you're in new jersey, I'm actually going to be in new jersey all next week for training so that might work perfectly. If you want the stuff and can meet I'll bring it with me.

  5. #5
    Moderator Turbo Mopar Staff Vigo's Avatar
    Join Date
    Feb 2006
    Location
    San Antonio,TX
    Posts
    10,798

    Re: TBI Header w/ Custom 3" swing valve and 3" downpipe, can bring to Carlisle Sat. A

    You werent kidding.. that is a VERY ported manifold hehe.

    Dont push the red button.You hear me?

  6. #6
    Hybrid booster
    Join Date
    Nov 2008
    Location
    Lindenwold New Jersey
    Posts
    464

    Re: TBI Header w/ Custom 3" swing valve and 3" downpipe, can bring to Carlisle Sat. A

    That sounds great. Ill take it

  7. #7
    Garrett booster
    Join Date
    Mar 2008
    Location
    Harrisburg, PA
    Posts
    114

    Re: TBI Header w/ Custom 3" swing valve and 3" downpipe, can bring to Carlisle Sat. A

    pm me about when you can meet up this week

  8. #8
    Garrett booster
    Join Date
    Mar 2008
    Location
    Harrisburg, PA
    Posts
    114

    Re: TBI Header w/ Custom 3" swing valve and 3" downpipe, can bring to Carlisle Sat. A

    sold!

Similar Threads

  1. Exhaust WTB 3" swing valve and 3" down pipe and a .63 exhaust housing
    By motorhead153 in forum Parts Wanted
    Replies: 3
    Last Post: 01-14-2012, 07:58 PM
  2. Exhaust EFI header, 3" swingvalve, downpipe combo
    By SCalder in forum Parts For Sale
    Replies: 8
    Last Post: 03-01-2010, 09:58 AM
  3. General i need a stall converter, 3" swing valve, and 3" muffler
    By turbovanpilot in forum Parts Wanted
    Replies: 1
    Last Post: 03-16-2009, 05:50 PM
  4. 3" swing valve
    By 86daytonat_top in forum Parts For Sale
    Replies: 1
    Last Post: 12-28-2006, 09:03 AM
  5. Replies: 5
    Last Post: 12-26-2006, 09:34 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •