Where do you guys order your exhaust manifold studs? Both the ones in the head and on the manifold for the turbo. Surely I'm not the only one who's misplaced these during a build. Haha
Where do you guys order your exhaust manifold studs? Both the ones in the head and on the manifold for the turbo. Surely I'm not the only one who's misplaced these during a build. Haha
Mark, I ordered mine from FWD Perf. if memory serves me correctly.
Kevin Isenberg EVERYTHING is for sale!
Thanks Kevin.
Head studs, any parts store, they are 8mmx1.25, the turbo studs are Japanese Metric IIRC.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
For anyone else looking that runs into this, I ended up getting the head studs at napa. Came in a package of 10 with the nuts. Even have a hex head for easy installation/removal. The studs for the turbo appear to be 9mm x 1.25. Still yet have to find them. Had I realized this when I drilled and tapped the manifold for the standard t3 flange, I would have tapped then out in a standard thread size that every parts store has instead of matching the factory threads. DOH!
They're probably 8 or 10mm. I don't think these cars have any 9mm.
Turbo is M10
M8 x 12.5 for intake/exhaust manifold studs/bolts.
M10 x 1.5 for the 4 turbo studs.
There is no M9 used anywhere.