Needed parts for 1992 3.0 Dodge Daytona.

[illtww]

Need to get the ole Daytona up and running:

Needed:

1. SBEC/ECU (Alternator is good but Won't Charge) (Car was converted to a manual form a 5 speed)

2. Fuel Pump Assembly: Fuel Gauge does not read correctly.

Thanks all!

[Lotashelbys]

I have a 92 3.0 5spd SBEC out of an Iroc $75+ship

[MNmopar]

Not sure what you meant by "(Car was converted to a manual form a 5 speed)", but if you meant it was converted to an auto from a 5 speed, I have an auto computer out of a 1993 daytona es v6 that you could have for $70 shipped.

[illtww]

Sorry. I meant A604 to 5speed.

Would like to find both of these parts. (the ecu and Fuel Sending unit) ~$50 shipped. The 3.0 ecus are fairly plentiful. (minivans, dusters etc) (it could be an auto or manual ECU.. does not matter since the A604 had its own computer...) (may just go pull one at pull-a-part)

[MNmopar]

True, they may not be as hard to find as some computers, if you want the auto version I'll do $50 plus shipping, but I'll keep it for any less. Personally, I'd pick up Jackson's to make sure you have the right one, but I'm not schooled on the A604 and it's separate computer either.

Anyway, let me know if you want it, otherwise good luck!

[illtww]

ya. The auto computers had a slightly lower rev-limiter than the Manuals. Not that the 3.0 pulled up top very well anyways...

I will keep you posted!

[illtww]

Snagged one from the pull-a-part. for 21 bux. Thanks guys!