LRE Parts - Post your wish list of engine parts

[looneytuner]

Do NOT PM me!!!!!

This is the LAST PM I will move to this thread. He probably doesn't have any 3" exhaust parts

chargerturbo87
chargerturbo87 is offline
Mitsu booster

Join Date
Apr 2012
Location
spokane
Posts
0

Cool LRE / Searching for Parts

searching for:
a) two 3 inch swing valves
b) complete 3 inch exhaust for 1988 Lebaron coupe
c) complete 3 inch exhaust for1987 shelby charger
d) three M/Perf 314 cams & springs & titanium retainers and v/locks
e) decals for 1987 shelby charger
f) two front mount inter-coolers 12" to 15" tall x 24" wide x 3" to 3.5" thick & 3 inch Inlet & Outlet on same side preferred.
g) 2.5" tubing, hoses, clamps etc. from turbo to i/c and return to t/b
h) two catalytic converters "Hi-FLow" - 16" long main chamber x 3 inch inlet & outlet.
i) 12" to 14" long x 3" Inlet Cone Air filter
j) two 3" "Y" pipes for exhaust cut out
k) two 1.5 "Y" Pipes to join two inter-coolers
l) two turbo oil line filters
m) walbro 255 in tank fuel pump for 1987 charger
n) 2 or 3 gage pillar pod for 87 charger
o) 2 or 3 gage pillar pod for 88 Lebaron

[omni_840]

I would be interested in any cool L body parts(suspension,performance,etc...)

[1BADVAN]

interested in prices on suspension parts and performance engine parts

[glhs727]

OK, maybe there should be some clarification on what parts LRE makes/does so people can ask for things they might have.
They will not have pillar pods, exhaust pipes, cold air intakes, stuff you can buy from FWD, TU or FM. What he would have is RACING parts, old MP parts, and some normally aspirated performance parts. Like ported heads, custom camshafts, solid lifters, custom valves. springs,special one off suspension pieces, blocks, pistons, cranks, and so forth....

[Wiscoballer]

would be interested in seeing what you have for 3.0L stuff

[Directconnection]

Stage 1 .63 Chrysler housing

I might be able to help you there... PM me if you cannot find one.

[bgbmxer]

I might be able to help you there... PM me if you cannot find one.

Pm sent

[ajakeski]

I'm interested in 525 and 555 transmission parts.
Also part number P4452019

Does LRE plan to stop making 525 transmission trusses and L body lowering springs?
If so I will buy a few sets of each.

[JohnnyIroc]

interested in any mopar performance cylinder heads IE
the Heart G head or the IMSA head
L body KYB or Koni struts
super 60 l body wiring harness

[looneytuner]

OK, maybe there should be some clarification on what parts LRE makes/does so people can ask for things they might have.
They will not have pillar pods, exhaust pipes, cold air intakes, stuff you can buy from FWD, TU or FM. What he would have is RACING parts, old MP parts, and some normally aspirated performance parts. Like ported heads, custom camshafts, solid lifters, custom valves. springs,special one off suspension pieces, blocks, pistons, cranks, and so forth....

thanks Cindy, good description what Bill has. Nothing newer than than 10 years ago. We just got hit by a hail storm. I have two broken windshields, and a smashed rear window, and some dents the size of a saucer, so he may not get on here as soon as I hoped. Somebody is jinxing us. The Good Friday tornado missed both of us by a half mile It went between our houses, then on May 23 last year my wife's car was crushed by the top of a 100' tree that got hit by straight line winds.

[glhs727]

Does LRE plan to stop making 525 transmission trusses and L body lowering springs?
If so I will buy a few sets of each.

No, they will still be manufacturing these items and are available through FWD-P

[ATaylorRacing]

Old Matchbox ran one of his 500 lift cams (carb motor) for about 200,000 miles. That cam, big valves, Holley 500, headers, electric water pump, slicks, light wt, etc, etc, and etc got it into the high 13s without nitrous. The cam was still good when I switched to a 2.5 with roller cam.

[BOOSTIFIED]

Lbody super 60 wiring harness
Masi 16v engine
255 in tank fuel pump 85 shelby charger

[ajakeski]

GLHS decals and the "shelby" decal that goes in the rear window of the Charger.

[tryingbe]

I'm interested in roller cam blanks and roller performance cam shaft.

[Directconnection]

I think these random "parts wanted" posts are fine.... but in all reality, it's too hap-hazzard and going to lead to only a few people really stepping up to the plate with cash in hand.

I highly suggest that LRE read these (like they probably have been) and then after getting a feel of what interests we have out here, make a complete list with prices of stuff they can easily get to (I know it's hard for them). This is in the best interest of both parties (and only fair to those members on here that follow the FS rules, too) because I am shocked that we have only *2* pages on this. If people knew of the great things LRE was responsible for in the past, and posted them for sale here, they would sell like hot-cakes. Mr. Lambrose doesn't have time for tire-kickers, and TM members want to see an actual items listing.

[RoadWarrior222]

would be interested in seeing what you have for 3.0L stuff

Me too, if there ever was any, cams, adjustable cam gears, manifolds, headers, any pistons or other motor parts for 3.0 V6.... though mostly interested in streetable rather than full race cams... and valvetrain parts if required to make them work... though if there's a set of variable pump lifters/lash adjusters (Rhodes type) that will tame a race cam ... then I might be tempted.

[looneytuner]

OK If a mod can close this thread till Bill gets on here that would be great. The posts on here already will be first in line. I don't think Bill ever played with the V6 cars. LRE hasn't made anything in at least 10 years.

I just tried to call him and got voice mail. Same yesterday. I think we are both busy working with insurance companies about residential and commercial building damage and car damage.

[iTurbo]

......would really appreciate a crack at that Masi 16v engine. Interest expressed in post #16 for what it's worth. Serious buyer here.