How to tell what computer, injectors? PT Cruiser turbo.

[turbovanman²]

04 5 speed, has mods but they bought it unknown to what was done, it has an AGP turbo, I would assume 50 trim, log manifold, external gate hooked up to manifold vacuum-5 psi. He wants me to turn up the wick, so I will be installing a wideband and some form of boost controller but I guess I need to know what computer it has and the limits of it. It has a Mopar sticker that says for non pollution controlled vehicles. Also, how to tell what injectors it has?

[bakes]

Throw your scanner on it and check the model /part number or cal ver. in info

[turbovanman²]

And compare it to what?

[bakes]

once you have that info use google

[turbovanman²]

LOL, should have thought of that.

Just changed a front wheel bearing, WTF? Uses the old style cartridge bearing, yuck.

[bakes]

ya its lighter than the bolt in

[glhs727]

post up the part numbers on the injectors and pcm. Even though it may have a mopar stock or staged pcm, they may also have a sct or diablosport tune done, especially if it's a big turbo car.

[turbovanman²]

Thanks, will do.

[Mopar318]

LOL, should have thought of that.

Just changed a front wheel bearing, WTF? Uses the old style cartridge bearing, yuck.

Older style? It uses a press in wheel bearing like all neons/cruisers/srt's.

For the injectors, you can tell with a quick glance. Purple would be non H/O, black with blue tip would be stage one or stock 04+ H/O and SRT-4, all black with a blue o-ring would be mopar stage 2/3 injectors.

[wheming]

PCM sticker number might give you squat. My Mopar S1 computer has a sticker number from an NA neon auto if i remember right. They apparently use whatever core and flash the stage cal. (and not change that sticker)



my android sent this for me using Tapatalk...

[turbovanman²]

Older style? It uses a press in wheel bearing like all neons/cruisers/srt's.

For the injectors, you can tell with a quick glance. Purple would be non H/O, black with blue tip would be stage one or stock 04+ H/O and SRT-4, all black with a blue o-ring would be mopar stage 2/3 injectors.

Yeah, older style. TM's started off with that design, then went to the bolt on hub setup.

Gotcha, thanks.

[Mopar318]

Yeah, older style. TM's started off with that design, then went to the bolt on hub setup.

Gotcha, thanks.

Ok, I thought you meant it used an older style hub in comparison to other PT's, when they are all press in, haha. Yeah bolt in is much easier. I bought a press just for working on my neon.

[turbovanman²]

Ok, I thought you meant it used an older style hub in comparison to other PT's, when they are all press in, haha. Yeah bolt in is much easier. I bought a press just for working on my neon.

They are tough to do, no flat spots to remove the hub first. Forgot how much I dislike working on those, much prefer the bolt on and go, lol.

[turbovanman²]

Injectors are black with a blue band at the bottom so I guess stage 2/3 injectors.

[Mopar318]

Injectors are black with a blue band at the bottom so I guess stage 2/3 injectors.

Nope stock 04/05 or stage 1. Stage 2/3 are all black with a blue seal o -ring.

[turbovanman²]

Ok, so what kind of boost can you run with a stage 1 50 trim?

[Mopar318]

about 18lbs max...but you need a wideband and scan tool for knock detection to be sure.

[turbovanman²]

about 18lbs max...but you need a wideband and scan tool for knock detection to be sure.

Yep, told him I am putting a wideband in before I turn it up.

It had a carbon fibre valve cover, took it off to reseal and its come apart, so I put an older valve cover on but there is no hole on top for the PCV. This cover has a vent up front and looks like maybe the pcv is on the drivers side or is that just another vent?

[glhs727]

Injectors are black with a blue band at the bottom so I guess stage 2/3 injectors.

go by part number! what does it say?

[Juggy]

Injectors are black with a blue band at the bottom so I guess stage 2/3 injectors.

Nope stock 04/05 or stage 1. Stage 2/3 are all black with a blue seal o -ring.

sounds like he has the black injectors with blue o ring, no???