Results 1 to 3 of 3

Thread: Manual Clutch will not go into third gear

  1. #1
    Mitsu booster
    Join Date
    Mar 2012
    Location
    Dallas Texas
    Posts
    1

    Manual Clutch will not go into third gear

    My wife has an 05 PT Cruiser, Manual Transmission, about 100k miles.

    It goes into first and second gear without a problem but once I try to shift into third gear it acts as if the clutch completely disappears or like there is something blocking it from going into gear. Usually I can wiggle the clutch from side to side and eventually get it into third but it takes a lot of effort.

    Does anyone know what is going on? or at least can you point me in the right direction?
    Thank you!

  2. #2
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,151

    Re: Manual Clutch will not go into third gear

    The plastic bushings @ the cable ends are known to deteriorate, especially on the transmission end because of the heat/oil/chemical exposure in the engine bay. If the shifter is really sloppy there probably shot or very well on their way to being shot. http://www.ptdoityourself.net/guide_...axleshift.html

    There are a few different companies selling polyrethane replacement bushings now instead of the fix suggested in that link. About $20 and they will last just about forever.

  3. #3
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Manual Clutch will not go into third gear

    If that doesn't fix it and you've made sure the shifter and linkage is ok, then you've got an internal issue, IE bent fork or worn synchro.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

Similar Threads

  1. Replies: 8
    Last Post: 05-09-2010, 06:41 PM
  2. Clutch just replaced. Wont go in gear! Help
    By cs daytona in forum "I need help!"
    Replies: 32
    Last Post: 04-19-2009, 11:15 PM
  3. Replies: 0
    Last Post: 01-30-2009, 02:19 AM
  4. Replies: 7
    Last Post: 07-18-2008, 03:52 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •