Results 1 to 6 of 6

Thread: Source for Holset rebuild parts?

  1. #1
    turbo addict
    Join Date
    Feb 2006
    Location
    Richmond, VA
    Posts
    1,527

    Source for Holset rebuild parts?

    Looking for a kit for my hy35. I see 2 vendors on ebay with a kit for about $45. I also see Gpop has one for $99. they look to be very similar in the parts supplied. Here is a link for one of the ebay kits http://www.ebay.com/itm/180831037082...witem=&vxp=mtr I'd rather not spend the extra 50 bucks if the kits are about the same quality. Any info appreciated. Thanks.

  2. #2
    turbo addict
    Join Date
    Sep 2006
    Location
    Indianapolis, IN
    Posts
    2,793

    Re: Source for Holset rebuild parts?

    Look for a local turbo or diesel shop. H1C kits list for around 26-45 on ebay, I bought a more complete genuine Holset kit from a local turbo/diesel shop and it was 52 bucks.

  3. #3
    turbo addict
    Join Date
    Feb 2006
    Location
    Richmond, VA
    Posts
    1,527

    Re: Source for Holset rebuild parts?

    Cool, what other parts came in the holset kit that aren't included in the ones on ebay?

  4. #4
    turbo addict
    Join Date
    Sep 2006
    Location
    Indianapolis, IN
    Posts
    2,793

    Re: Source for Holset rebuild parts?

    some of the ebay kits didn't have thrust bushing only journal bushings, others had all the bushings but didn't have new bracket/clamp pieces for the turbine housing or new bolts. The holset kit was everything but the parts that ride on either side of the thrust bushing. That was a H1D kit though. I think the HX kits have those, at least my HX 30 kit did.

  5. #5
    turbo addict
    Join Date
    Feb 2006
    Location
    Richmond, VA
    Posts
    1,527

    Re: Source for Holset rebuild parts?

    what are you using the hx30 on?

  6. #6
    turbo addict
    Join Date
    Sep 2006
    Location
    Indianapolis, IN
    Posts
    2,793

    Re: Source for Holset rebuild parts?

    Nothing at the moment, I was planning it for a 8v build but decided to go 2.4, I picked up a H1C for dirt cheap and rebuilt it.

Similar Threads

  1. new parts source?
    By hutwe in forum Maintenance & General Tech
    Replies: 4
    Last Post: 11-19-2010, 07:05 PM
  2. Good parts source for top-end rebuild on 2.5 Turbo???
    By Tekman in forum "I need help!"
    Replies: 9
    Last Post: 12-31-2009, 11:18 AM
  3. Holset rebuild sources
    By mboyek in forum Turbos & Intercoolers!
    Replies: 5
    Last Post: 07-21-2009, 01:08 PM
  4. Best Source for Koni Rebuild
    By cqlink in forum Maintenance & General Tech
    Replies: 16
    Last Post: 10-01-2008, 08:47 AM
  5. Holset Rebuild - Who's Done It?
    By DeckSetter in forum Turbos & Intercoolers!
    Replies: 3
    Last Post: 08-06-2006, 03:07 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •