Probably pretty preposterous van project

[Clay]

Dun yet?

[ShelGame]

No worries, if you dig it up, that would be great.

OK, so they are actually slightly different - the CB is 237.8mm and the SRT-4 is 238.1mm. But the 1st gen 2.4 is the same as the CB - 237.8mm. My engine is from a '99 PT (NA), so it's the 1st gen design and the same as the CB.

[turbovanman²]

OK, so they are actually slightly different - the CB is 237.8mm and the SRT-4 is 238.1mm. But the 1st gen 2.4 is the same as the CB - 237.8mm. My engine is from a '99 PT (NA), so it's the 1st gen design and the same as the CB.

Awesome,

[moparman76_69]

Ordered the new exhaust housing for the turbo. Went and picked up a rebuild kit and had the wheels balanced. Probably tear into it tomorrow.

[turbovanman²]

What turbo? I don't think you mentioned it.

[moparman76_69]

Well 3_bar came over and helped liberate the van of the 8V and trans.

What turbo? I don't think you mentioned it.

Holset. I plan on detailing the rebuild info and making a separate thread for it.

[3Bar_Mopar]

Well 3_bar came over and helped liberate the van of the 8V and trans.

Well, I helped get it 99.9% removed I guess.

It looked pretty much like this when I left...

[turbovanman²]

I like the wheels,

Which Holset?

[moparman76_69]

H1C same wheels as an HX35.

[turbovanman²]

H1C same wheels as an HX35.

WH1 or H1C? According to the old KC article, the WH1 is the same as the HX35, the H1C is different and has a huge a/r, 18-21 cm2., but if not, that's another option for turbo's.

[moparman76_69]

The wheels measurements are the same. H1Cs had 3 (?) different wheel options. This one came off a ford diesel pickup. It *had* an 18 cm2 divided housing on it but I have another housing coming for it.

[turbovanman²]

The wheels measurements are the same. H1Cs had 3 (?) different wheel options. This one came off a ford diesel pickup. It *had* an 18 cm2 divided housing on it but I have another housing coming for it.

Good to know,

What size?

[2.5tsa]

Do you think it will break in to the 17's this year at SDAC?

[moparman76_69]

Good to know,

What size?

.63 ar single scroll with v-band out.

Do you think it will break in to the 17's this year at SDAC?

I've already ran low 15s

[2.5tsa]

.
I've already ran low 15s

What did you run at SDAC?

-Cheers

[moparman76_69]

What did you run at SDAC?

-Cheers

15.2 at 92


I rebuilt the turbo yesterday, I just have to torque the nut down and put the housings back on. Dropped the pistons off at the coating place today. Ceramic on top and anti-friction on the skirts. All my bolts from the dealer should be in in the next couple of days. Need to get the head cleaned up and off to the machine shop and then the coaters.

[2.5tsa]

Are you sure? I recall it running 18's. Do you have your time slips?

-Cheers

[turbovanman²]

.63 ar single scroll with v-band out.

Nice, that should spool very nicely. Considering putting a .63 on mine.

[moparman76_69]

Yeah guy on ebay is selling housing for the HX35/H1C and also the HX40.

Total investment in this turbo is pretty good.

$40 for the turbo
$62 for a new compressor wheel
$52 for a genuine Holset rebuild kit
$30 for the balance
$210 for the new housing.

[turbovanman²]

Where did you get the comp wheel? I need one for my HX35.