Page 2 of 11 FirstFirst 123456 ... LastLast
Results 21 to 40 of 202

Thread: Scatter Shield - Reeves Racing/Creative Fabrication

  1. #21
    Supporting Member II Turbo Mopar Contributor Shadow's Avatar
    Join Date
    Dec 2006
    Location
    Aubigny, Manitoba, Canada
    Posts
    5,088

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    James, first off, HooRah for bringing these to market!

    I def want one With hardware, but I'm also trying to figure how much moding I'm going to have to do for my turbo/IC piping.

    Judging by your first mock up pic, it Looks like it's Flush to the top of the tranny. Is that the case? Or does it stick up a little higher than the trans case?

    Robert Mclellan
    http://www.youtube.com/watch?v=wambNdfnu5M
    10.04 @ 143.28mph (144.82 highest mph)
    Worlds fastest 8v MTX Shelby Charger
    Manitoba's Fastest 4cyl!
    8 valve, No Nitrous!
    New clutch combo is the SH!T!

  2. #22
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    1) glhs727 - 3 (need to check 413's) - (Hardware???)
    2) lengel - 1 - No timing window? - WITH hardware
    3) Turbo3Iroc - 1 - No timing window? - (Hardware???)
    4) Onlooker - 1 - (Hardware???)
    5) 168glhs1986 - 1 - no hardware
    6) Pat - 2 - (Hardware???)
    7) 4 l-bodies - 1 - NO hardware
    8) BadAssPerformance - 2 - WITH Hardware
    9) mcsvt - 1- WITH hardware
    10) chilort - 1 WITH hardware but possibly no shipping
    11)contraption22 - 2.4/auto w/hardware
    12)
    13)
    14)
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

  3. #23
    Supporting Member Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Southern Wisconsin
    Posts
    400

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    1) glhs727 - 3 (need to check 413's) - (Hardware???)

    2) lengel - 1 - No timing window? - WITH hardware

    3) Turbo3Iroc - 1 - No timing window? - (Hardware???)

    4) Onlooker - 1 - WITH Hardware

    5) 168glhs1986 - 1 - no hardware

    6) Pat - 2 - (Hardware???)

    7) 4 l-bodies - 1 - NO hardware

    8) BadAssPerformance - 2 - WITH Hardware

    9) mcsvt - 1- WITH hardware

    10) chilort - 1 WITH hardware but possibly no shipping

    11)contraption22 - 2.4/auto w/hardware

    12)

    13)

    14)

  4. #24
    ...on your color TV screen... Turbo Mopar Contributor Reeves's Avatar
    Join Date
    Jan 2006
    Location
    Kentucky
    Posts
    4,860

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Quote Originally Posted by Shadow View Post
    James, first off, HooRah for bringing these to market!

    I def want one With hardware, but I'm also trying to figure how much moding I'm going to have to do for my turbo/IC piping.

    Judging by your first mock up pic, it Looks like it's Flush to the top of the tranny. Is that the case? Or does it stick up a little higher than the trans case?
    See the first post again. I'll add pic(s) of it on top of the trans.

    James Reeves - Reeves Racing
    World's Fastest 8 Valve - 146.88 mph
    86 GLH-T 9.99 at 143.78 mph
    86 GLHS #169 Mom's - complete Super 60 car
    87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
    88 Shelby Z 13.5 - been in storage for 15 years
    03 SRT-4 12.24 Mom's
    07 Charger 5.7L 12.48 Dad's

  5. #25
    Hybrid booster
    Join Date
    Apr 2009
    Location
    Bethany Ct.
    Posts
    285

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    1) glhs727 - 3 (need to check 413's) - (Hardware???)

    2) lengel - 1 - No timing window? - WITH hardware

    3) Turbo3Iroc - 1 - No timing window? - (Hardware???)

    4) Onlooker - 1 - WITH Hardware

    5) 168glhs1986 - 1 - no hardware

    6) Pat - 2 - (Hardware???)

    7) 4 l-bodies - 1 - NO hardware

    8) BadAssPerformance - 2 - WITH Hardware

    9) mcsvt - 1- WITH hardware

    10) chilort - 1 WITH hardware but possibly no shipping

    11)contraption22 - 2.4/auto w/hardware

    12) T-Bohn wiz wit'

    13)

    14)
    Gene

  6. #26
    Garrett booster
    Join Date
    Jan 2009
    Location
    Sauk Centre, MN
    Posts
    122

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    1) glhs727 - 3 (need to check 413's) - (Hardware???)

    2) lengel - 1 - No timing window? - WITH hardware

    3) Turbo3Iroc - 1 - No timing window? - (Hardware???)

    4) Onlooker - 1 - WITH Hardware

    5) 168glhs1986 - 1 - no hardware

    6) Pat - 2 - (Hardware???)

    7) 4 l-bodies - 1 - NO hardware

    8) BadAssPerformance - 2 - WITH Hardware

    9) mcsvt - 1- WITH hardware

    10) chilort - 1 WITH hardware but possibly no shipping

    11)contraption22 - 2.4/auto w/hardware

    12) T-Bohn wiz wit'

    13) 84omni -1- WITH hardware

    14)

  7. #27
    Hybrid booster
    Join Date
    Apr 2010
    Location
    eagleville pa
    Posts
    845

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    [QUOTE=84omni;885643]1) glhs727 - 3 (need to check 413's) - (Hardware???)

    2) lengel - 1 - No timing window? - WITH hardware

    3) Turbo3Iroc - 1 - No timing window? - (Hardware???)

    4) Onlooker - 1 - WITH Hardware

    5) 168glhs1986 - 1 - no hardware

    6) Pat - 2 - (Hardware???)

    7) 4 l-bodies - 1 - NO hardware

    8) BadAssPerformance - 2 - WITH Hardware

    9) mcsvt - 1- WITH hardware

    10) chilort - 1 WITH hardware but possibly no shipping

    11)contraption22 - 2.4/auto w/hardware

    12) T-Bohn wiz wit'

    13) 84omni -1- WITH hardware

    14)onerippinturbo2 -1- with hardware please provide paypal info

  8. #28
    turbo addict
    Join Date
    Jan 2008
    Location
    Squamish BC
    Posts
    3,618

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Question for you James ,would paint , powerder coating or elctro plating affect the NHRA rating at all???
    I like to get one but funds are tight for the next couple of months.

  9. #29
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Quote Originally Posted by bakes View Post
    Question for you James ,would paint , powerder coating or elctro plating affect the NHRA rating at all???
    I like to get one but funds are tight for the next couple of months.
    I just checked the rule book and it does not specify whether it can be painted or not, so I think paint or powder is OK.

    ALSO, under General Regulations, it specifies "with clutch" so AFAIK not required for Auto unless thats under "class rules" or you just want one for safety

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  10. #30
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,801

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    1) glhs727 - 3 (need to check 413's) - (Hardware???)

    2) lengel - 1 - No timing window? - WITH hardware

    3) Turbo3Iroc - 1 - No timing window? - (Hardware???)

    4) Onlooker - 1 - WITH Hardware

    5) 168glhs1986 - 1 - no hardware

    6) Pat - 2 - WITH Hardware

    7) 4 l-bodies - 1 - NO hardware

    8) BadAssPerformance - 2 - WITH Hardware

    9) mcsvt - 1- WITH hardware

    10) chilort - 1 WITH hardware but possibly no shipping

    11)contraption22 - 2.4/auto w/hardware

    12) T-Bohn wiz wit'

    13) 84omni -1- WITH hardware

    14)onerippinturbo2 -1- with hardware please provide paypal info

  11. #31
    turbo addict
    Join Date
    Dec 2005
    Location
    Bristol, CT
    Posts
    2,722

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    1) glhs727 - 3 (need to check 413's) - (Hardware???)

    2) lengel - 1 - No timing window? - WITH hardware

    3) Turbo3Iroc - 1 - No timing window with hardware

    4) Onlooker - 1 - WITH Hardware

    5) 168glhs1986 - 1 - no hardware

    6) Pat - 2 - WITH Hardware

    7) 4 l-bodies - 1 - NO hardware

    8) BadAssPerformance - 2 - WITH Hardware

    9) mcsvt - 1- WITH hardware

    10) chilort - 1 WITH hardware but possibly no shipping

    11)contraption22 - 2.4/auto w/hardware

    12) T-Bohn wiz wit'

    13) 84omni -1- WITH hardware

    14)onerippinturbo2 -1- with hardware please provide paypal info

  12. #32
    Basic Vendor (MSD, Hawk, etc) Turbo Mopar Contributor rbryant's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, AZ
    Posts
    3,493

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    1. glhs727 - 3 (need to check 413's) - (Hardware???)
    2. lengel - 1 - No timing window? - WITH hardware
    3. Turbo3Iroc - 1 - No timing window with hardware
    4. Onlooker - 1 - WITH Hardware
    5. 168glhs1986 - 1 - no hardware
    6. Pat - 2 - WITH Hardware
    7. 4 l-bodies - 1 - NO hardware
    8. BadAssPerformance - 2 - WITH Hardware
    9. mcsvt - 1- WITH hardware
    10. chilort - 1 WITH hardware but possibly no shipping
    11. contraption22 - 2.4/auto w/hardware
    12. T-Bohn wiz wit'
    13. 84omni -1- WITH hardware
    14. onerippinturbo2 -1- with hardware please provide paypal info
    15. rbryant -1- 2.4/568 (NO hardware, no timing window)


    Adding myself to the list.

    Can you provide a list of the required hardware including bolt sizes, lengths, thread pitch,etc?

    Thanks,

    Rich

  13. #33
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Quote Originally Posted by rbryant View Post
    Can you provide a list of the required hardware including bolt sizes, lengths, thread pitch,etc?
    I'm guessing that list comes with the hardware package?

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  14. #34
    Garrett booster
    Join Date
    Aug 2009
    Location
    Brookfield IL
    Posts
    128

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    1. glhs727 - 3 (need to check 413's) - (Hardware???)
    2. lengel - 1 - No timing window? - WITH hardware
    3. Turbo3Iroc - 1 - No timing window with hardware
    4. Onlooker - 1 - WITH Hardware
    5. 168glhs1986 - 1 - no hardware
    6. Pat - 2 - WITH Hardware
    7. 4 l-bodies - 1 - NO hardware
    8. BadAssPerformance - 2 - WITH Hardware
    9. mcsvt - 1- WITH hardware
    10. chilort - 1 WITH hardware but possibly no shipping
    11. contraption22 - 2.4/auto w/hardware
    12. T-Bohn wiz wit'
    13. 84omni -1- WITH hardware
    14. onerippinturbo2 -1- with hardware please provide paypal info
    15. rbryant -1- 2.4/568 (NO hardware, no timing window)
    16. tommy-1- 2.5/568 w/ hardware

  15. #35
    Hybrid booster Turbo Mopar Contributor shmedley's Avatar
    Join Date
    Dec 2005
    Location
    Downers Grove, IL
    Posts
    779

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    1. glhs727 - 3 (need to check 413's) - (Hardware???)
    2. lengel - 1 - No timing window? - WITH hardware
    3. Turbo3Iroc - 1 - No timing window with hardware
    4. Onlooker - 1 - WITH Hardware
    5. 168glhs1986 - 1 - no hardware
    6. Pat - 2 - WITH Hardware
    7. 4 l-bodies - 1 - NO hardware
    8. BadAssPerformance - 2 - WITH Hardware
    9. mcsvt - 1- WITH hardware
    10. chilort - 1 WITH hardware but possibly no shipping
    11. contraption22 - 2.4/auto w/hardware
    12. T-Bohn wiz wit'
    13. 84omni -1- WITH hardware
    14. onerippinturbo2 -1- with hardware please provide paypal info
    15. rbryant -1- 2.4/568 (NO hardware, no timing window)
    16. tommy-1- 2.5/568 w/ hardware
    17. Shmedley-1- 2.2/555 WITH hardware
    Thanks Brad S. SDAC National Proud Member SDAC Chicago Proud Member 14 Ram 1500 86 Shelby Charger "Chicago Stock"

  16. #36
    ...on your color TV screen... Turbo Mopar Contributor Reeves's Avatar
    Join Date
    Jan 2006
    Location
    Kentucky
    Posts
    4,860

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    How many people are seriously interested in purchasing one for an auto (A-413)? The majority of this design fits an auto, but a minor mod would need to be made, making 2 seperate builds.....basically the current new design fits A520/A555/A523/A568 and a new style would need to be for A413. If there is enough interest, I will do it....

    Thoughts/Comments?

    James Reeves - Reeves Racing
    World's Fastest 8 Valve - 146.88 mph
    86 GLH-T 9.99 at 143.78 mph
    86 GLHS #169 Mom's - complete Super 60 car
    87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
    88 Shelby Z 13.5 - been in storage for 15 years
    03 SRT-4 12.24 Mom's
    07 Charger 5.7L 12.48 Dad's

  17. #37
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    I could not find anything in the rule book requiring a scatter shield in a FWD transaxle... For an auto, most tracks would probably want a blanket or diaper?

    Anyone who wants the A413 shield know anything different about the NHRA requirements?

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  18. #38
    Basic Vendor (MSD, Hawk, etc) Turbo Mopar Contributor rbryant's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, AZ
    Posts
    3,493

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Quote Originally Posted by BadAssPerformance View Post
    I could not find anything in the rule book requiring a scatter shield in a FWD transaxle... For an auto, most tracks would probably want a blanket or diaper?

    Anyone who wants the A413 shield know anything different about the NHRA requirements?
    How likely is a flex plate/torque converter to take out your nads compared to a flywheel/pressure plate?

    It just seems like less of a need on an slushbox but I guess I could be mistaken.

    -Rich

  19. #39
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Yep... That and the input shaft has to break off completely for the TC to come loose... then it has more surface area to not slice thru the bellhousing like a thin flywheel.

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  20. #40
    ...on your color TV screen... Turbo Mopar Contributor Reeves's Avatar
    Join Date
    Jan 2006
    Location
    Kentucky
    Posts
    4,860

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Added a couple new shots to the original post, and updated PAID peoples.

    James Reeves - Reeves Racing
    World's Fastest 8 Valve - 146.88 mph
    86 GLH-T 9.99 at 143.78 mph
    86 GLHS #169 Mom's - complete Super 60 car
    87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
    88 Shelby Z 13.5 - been in storage for 15 years
    03 SRT-4 12.24 Mom's
    07 Charger 5.7L 12.48 Dad's

Page 2 of 11 FirstFirst 123456 ... LastLast

Similar Threads

  1. Scatter shields
    By Pat in forum Transmission
    Replies: 71
    Last Post: 03-24-2015, 02:29 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •