Page 1 of 11 12345 ... LastLast
Results 1 to 20 of 202

Thread: Scatter Shield - Reeves Racing/Creative Fabrication

  1. #1
    ...on your color TV screen... Turbo Mopar Contributor Reeves's Avatar
    Join Date
    Jan 2006
    Location
    Kentucky
    Posts
    4,860

    Scatter Shield - Reeves Racing/Creative Fabrication

    Here is the group buy on these scatter shields. This scatter shield is built per NHRA rules and it is mandatory per NHRA rules that you have it if you run faster than 11.50 (!)

    This scatter shield is the same I run on my OMNI. It has been tested to fit the 2.2L/2.5L engine family and A-520/A-555 and A-523/A-568.
    In it's current configuration, it WILL NOT fit a A-413. One mounting tab would need to be moved. You may also want a wider unit for an auto?
    It has not been physically tested to fit the T3 crank sensor, but from measurement testing, it should clear just fine.
    It has not been physically tested on a T3 STOCK intake and throttle body configuration, and there looks to be SOME CLEARANCE ISSUES. The throttle body may need to be flipped over or otherwise modified.

    This scatter shield includes a timing window cover. (2) bolts will need to be removed to take the cover off so you can see your stock trans timing window.

    The scatter shield will come to you unpainted. That way you can choose what color you want and if you want to paint it or get it powdercoated (or leave it bare and oily like mine is).

    Go here:
    http://www.turbo-mopar.com/forums/sh...lds&highlight=

    Or here:
    http://www.turbo-mopar.com/forums/sh...l=1#post844921

    For more info.

    Here is the original mock up:
    Click image for larger version. 

Name:	2011-08-23_18-45-13_135.jpg 
Views:	703 
Size:	490.3 KB 
ID:	36833

    Here it is on my OMNI:
    Click image for larger version. 

Name:	DSCN0721.JPG 
Views:	679 
Size:	350.7 KB 
ID:	36832

    Here is the pre-production weight.
    Click image for larger version. 

Name:	DSCN0720.JPG 
Views:	647 
Size:	418.2 KB 
ID:	36831

    Here's a shot of it on a A-568:
    Click image for larger version. 

Name:	101_0529.jpg 
Views:	622 
Size:	59.1 KB 
ID:	36839

    Here is a shot with the timing window cover removed:
    Click image for larger version. 

Name:	2012-01-22_11-36-06_414.jpg 
Views:	527 
Size:	450.4 KB 
ID:	37015

    Here is a shot of the hardware you'll receive if you buy the hardware option:
    Click image for larger version. 

Name:	2012-01-22_11-41-20_937.jpg 
Views:	486 
Size:	403.7 KB 
ID:	37016

    Price will be $150 shipped (shipping limited up to $20....more than that and you'll pay the difference).
    Hardware option will be an additional $20 and include all hardware necessary to install.

    Payment in full is expected if you want one. Cut-off date for the first group of scatter shields to be made is February 1st, 2012. After that, they may or may not be available, and the price will most likely go up, as we are only buying enough material for the group buy posted here.

    Post here and PM me for info on check, money order, or Paypal payments if you want one or more.


    Disclaimer:
    This is built to NHRA rules ONLY. It is in NO WAY guaranteed to save you or your car in the chance of a flywheel, clutch, flexplate, or torque convertor explosion. This will fit the above transmissions. It is NOT implied that it will fit your turbo, header, intercooler tubing combo, etc. Intercooler plumbing, radiator hoses, heater hoses, throttle bodies, intakes, etc, may need to be modified depending on your setup.

    Thanks guys for the interest and motivation to make more of these

    I'll be updating this orginal post with more fitment pictures soon. I'll be updating the thread with production pictures as production starts.

    Here's what I have so far. Make sure you see your name and correct info below.

    1) glhs727 - 1 - Hardware???
    2) lengel - 1 - No timing window - WITH hardware - PAID - SHIPPED - RECEIVED
    3) Turbo3Iroc - 1 - No timing window - WITH hardware - PAID - SHIPPED - RECEIVED - SHIPPED NEW HARDWARE - RECEIVED NEW HARDWARE
    4) Onlooker - 1 - WITH Hardware - PAID - SHIPPED - RECEIVED
    5) 168glhs1986 - 1 - WITH Hardware - PAID - SHIPPED - RECEIVED
    6) Pat - 2 - WITH hardware - PAID - SHIPPED - RECEIVED
    7) 4 l-bodies - 1 - NO hardware - PAID - SHIPPED - RECEIVED
    8) BadAssPerformance - 3 - WITH Hardware - PAID - SHIPPED - RECEIVED
    9) mcsvt - 1- WITH hardware - PAID - SHIPPED - RECEIVED
    10) chilort - 1 WITH hardware but no shipping - PAID - RECEIVED

    11) contraption22 - 1 - WITH hardware
    12) T-Bohn - 1 - WITH hardware - PAID - SHIPPED - RECEIVED
    13) 84omni - 1 - WITH hardware - PAID - SHIPPED - RECEIVED

    14) onrippinturbo2 - 1 - WITH hardware - PAID - SHIPPED
    15) rbryant - 1 - (NO hardware, no timing window) - PAID - SHIPPED
    16) tommy - 1 - w/ hardware - PAID - SHIPPED - RECEIVED
    17) Shmedley - 1 - WITH hardware - PAID - SHIPPED - RECEIVED
    18) Shadow-1- With hardware and timing window - PAID - SHIPPED
    19) Daver-1 - with hardware and timing window - PAID - SHIPPED
    20) DOHCRT - 1 - No Hardware - PAID - SHIPPED
    Last edited by Reeves; 03-30-2012 at 08:15 AM.

    James Reeves - Reeves Racing
    World's Fastest 8 Valve - 146.88 mph
    86 GLH-T 9.99 at 143.78 mph
    86 GLHS #169 Mom's - complete Super 60 car
    87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
    88 Shelby Z 13.5 - been in storage for 15 years
    03 SRT-4 12.24 Mom's
    07 Charger 5.7L 12.48 Dad's

  2. #2
    Supporting Member Turbo Mopar Contributor glhs727's Avatar
    Join Date
    Dec 2005
    Location
    Spring, Texas
    Posts
    2,168

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    I'll take 3. One for a a568 with crank sensor, one for a a413/2.2 and one for a a413 with 2.4 motor.......
    FWD Performance is a performance shop with a significant investment in this market. We pride oursleves with a hard work ethic, friendly customer service, and honest business dealings with no hidden fees. FWD Performance, Real Race Products by Real Racers.

  3. #3
    boostaholic
    Join Date
    Oct 2008
    Location
    Palmerton PA
    Posts
    1,287

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    I will take one with the hardware option. Is it possible to have my sheild made with no timing window cut out? Ill will pm you in a few min. Thanks for doing this for us james!

    Adam

  4. #4
    turbo addict
    Join Date
    Dec 2005
    Location
    Bristol, CT
    Posts
    2,722

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Sign me up! Price is very reasonable. I would also like the non window option if available. PM on the way.

  5. #5
    Supporting Member Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Southern Wisconsin
    Posts
    400

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    I'll take 1

  6. #6
    turbo addict
    Join Date
    Oct 2007
    Location
    Rockville, Md
    Posts
    3,520

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    1 for me please

  7. #7
    ...on your color TV screen... Turbo Mopar Contributor Reeves's Avatar
    Join Date
    Jan 2006
    Location
    Kentucky
    Posts
    4,860

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Quote Originally Posted by glhs727 View Post
    I'll take 3. One for a a568 with crank sensor, one for a a413/2.2 and one for a a413 with 2.4 motor.......
    Cindy, I'll gladly make you 3, but it has not yet been fit to a A-413. I need to get to my transmission storage shed to get one out and test fit it on the mockup stand. I do believe it will fit, but I know the bellhousing area on the A-413 is quite different. I will update this thread when I get this done.

    Quote Originally Posted by lengel View Post
    I will take one with the hardware option. Is it possible to have my sheild made with no timing window cut out? Ill will pm you in a few min. Thanks for doing this for us james!

    Adam
    Quote Originally Posted by Turbo3Iroc View Post
    Sign me up! Price is very reasonable. I would also like the non window option if available. PM on the way.
    Yes, I can leave out the timing window.

    Quote Originally Posted by OnLooker View Post
    I'll take 1
    PM responded to!

    Quote Originally Posted by 168glhs1986 View Post
    1 for me please
    Send PM please for payment info.

    James Reeves - Reeves Racing
    World's Fastest 8 Valve - 146.88 mph
    86 GLH-T 9.99 at 143.78 mph
    86 GLHS #169 Mom's - complete Super 60 car
    87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
    88 Shelby Z 13.5 - been in storage for 15 years
    03 SRT-4 12.24 Mom's
    07 Charger 5.7L 12.48 Dad's

  8. #8
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,801

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Hey James....don't forget I am in for two! PM me your PayPal addy. Thanks for getting this together for us. It's definitely a need for the community.

    For you guys racing or running these cars hard, this a very smart,low cost investment for safety.

  9. #9
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Quote Originally Posted by Reeves View Post
    Cindy, I'll gladly make you 3, but it has not yet been fit to a A-413. I need to get to my transmission storage shed to get one out and test fit it on the mockup stand. I do believe it will fit, but I know the bellhousing area on the A-413 is quite different. I will update this thread when I get this done.
    The starter is in the front on a 2.4. Will that make a difference?
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

  10. #10
    turbo addict
    Join Date
    Dec 2006
    Location
    MPLS, MN
    Posts
    3,589

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    James, put me down for one without hardware. Thanks for making these available to us in a group buy. Very resonable price!
    Todd Nelson

  11. #11
    turbo addict
    Join Date
    Apr 2007
    Location
    Atlanta
    Posts
    1,632

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Want. I'll PM you.

  12. #12
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Quote Originally Posted by contraption22 View Post
    The starter is in the front on a 2.4. Will that make a difference?
    It won't be an issue if you have a A568 (starter on back) ... I put it on my 2.4L/A568 to be sure of this. As James noted above, its for the 520/555/523/568's. It was not designed for or tested on the T350/T850 trans' and would need significant modifications to align with the trans hole that lines up with the front ear of the 2.4L block

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  13. #13
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Hey folks... Lets try to keep this organized for Reeves as a running list like we do for other Group Buys. Also, don't for get to confirm if you want hardware or not! If you do not, please read the NHRA rule book on hardware requirements!

    1) glhs727 - 3 (need to check 413's) - (Hardware???)
    2) lengel - 1 - No timing window? - WITH hardware
    3) Turbo3Iroc - 1 - No timing window? - (Hardware???)
    4) Onlooker - 1 - (Hardware???)
    5) 168glhs1986 - 1 - (Hardware???)
    6) Pat - 2 - (Hardware???)
    7) 4 l-bodies - 1 - NO hardware
    8) BadAssPerformance - 2 - WITH Hardware
    9)
    10)
    11)
    12)
    13)
    14)

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  14. #14
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Quote Originally Posted by BadAssPerformance View Post
    It won't be an issue if you have a A568 (starter on back) ... I put it on my 2.4L/A568 to be sure of this. As James noted above, its for the 520/555/523/568's. It was not designed for or tested on the T350/T850 trans' and would need significant modifications to align with the trans hole that lines up with the front ear of the 2.4L block
    But Cindy requested one for a 2.4/auto. I would assume that she meant for use with a neon 31th.
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

  15. #15
    ...on your color TV screen... Turbo Mopar Contributor Reeves's Avatar
    Join Date
    Jan 2006
    Location
    Kentucky
    Posts
    4,860

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Quote Originally Posted by BadAssPerformance View Post
    Hey folks... Lets try to keep this organized for Reeves as a running list like we do for other Group Buys. Also, don't for get to confirm if you want hardware or not! If you do not, please read the NHRA rule book on hardware requirements!

    1) glhs727 - 3 (need to check 413's) - (Hardware???)
    2) lengel - 1 - No timing window? - WITH hardware
    3) Turbo3Iroc - 1 - No timing window? - (Hardware???)
    4) Onlooker - 1 - (Hardware???)
    5) 168glhs1986 - 1 - (Hardware???)
    6) Pat - 2 - (Hardware???)
    7) 4 l-bodies - 1 - NO hardware
    8) BadAssPerformance - 2 - WITH Hardware
    9)
    10)
    11)
    12)
    13)
    14)
    Wow! Thanks JT! That's way better! I was just keeping a word document of them all. LOL

    Also, Jeremy (Chilort) your PM box is full.

    I will update with a hardware picture soon. It may be a couple days as I am in Lima, OH till Friday, then a trip to Michigan this weekend, then off to Texas next week. I'll try like heck to get the pic of the hardware and pics of fitment on a A-413.

    James Reeves - Reeves Racing
    World's Fastest 8 Valve - 146.88 mph
    86 GLH-T 9.99 at 143.78 mph
    86 GLHS #169 Mom's - complete Super 60 car
    87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
    88 Shelby Z 13.5 - been in storage for 15 years
    03 SRT-4 12.24 Mom's
    07 Charger 5.7L 12.48 Dad's

  16. #16
    turbo addict
    Join Date
    Apr 2007
    Location
    Atlanta
    Posts
    1,632

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Quote Originally Posted by Reeves View Post
    Also, Jeremy (Chilort) your PM box is full.
    Fixed it. Sorry.

  17. #17
    Invisible Turbo Mopar Contributor mcsvt's Avatar
    Join Date
    Dec 2005
    Location
    Poughkeepsie, NY
    Posts
    3,518

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    1) glhs727 - 3 (need to check 413's) - (Hardware???)
    2) lengel - 1 - No timing window? - WITH hardware
    3) Turbo3Iroc - 1 - No timing window? - (Hardware???)
    4) Onlooker - 1 - (Hardware???)
    5) 168glhs1986 - 1 - (Hardware???)
    6) Pat - 2 - (Hardware???)
    7) 4 l-bodies - 1 - NO hardware
    8) BadAssPerformance - 2 - WITH Hardware
    9) mcsvt - 1- WITH hardware
    10)
    11)
    12)
    13)
    14)
    -Gary Mazzone-
    1986 GLHS #168

  18. #18
    turbo addict
    Join Date
    Oct 2007
    Location
    Rockville, Md
    Posts
    3,520

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    168glhs1986 updated with no hardware and pm sent.

    1) glhs727 - 3 (need to check 413's) - (Hardware???)
    2) lengel - 1 - No timing window? - WITH hardware
    3) Turbo3Iroc - 1 - No timing window? - (Hardware???)
    4) Onlooker - 1 - (Hardware???)
    5) 168glhs1986 - 1 - no hardware
    6) Pat - 2 - (Hardware???)
    7) 4 l-bodies - 1 - NO hardware
    8) BadAssPerformance - 2 - WITH Hardware
    9) mcsvt - 1- WITH hardware
    10)
    11)
    12)
    13)
    14)

  19. #19
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    Quote Originally Posted by Reeves View Post
    Wow! Thanks JT! That's way better! I was just keeping a word document of them all. LOL.
    LOL, Glad you like! It worked well that way for the Calendar thread too!

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  20. #20
    turbo addict
    Join Date
    Apr 2007
    Location
    Atlanta
    Posts
    1,632

    Re: Scatter Shield - Reeves Racing/Creative Fabrication

    1) glhs727 - 3 (need to check 413's) - (Hardware???)
    2) lengel - 1 - No timing window? - WITH hardware
    3) Turbo3Iroc - 1 - No timing window? - (Hardware???)
    4) Onlooker - 1 - (Hardware???)
    5) 168glhs1986 - 1 - no hardware
    6) Pat - 2 - (Hardware???)
    7) 4 l-bodies - 1 - NO hardware
    8) BadAssPerformance - 2 - WITH Hardware
    9) mcsvt - 1- WITH hardware
    10) chilort - 1 WITH hardware but possibly no shipping
    11)
    12)
    13)
    14)

Page 1 of 11 12345 ... LastLast

Similar Threads

  1. Scatter shields
    By Pat in forum Transmission
    Replies: 71
    Last Post: 03-24-2015, 02:29 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •