Here is the group buy on these scatter shields. This scatter shield is built per NHRA rules and it is mandatory per NHRA rules that you have it if you run faster than 11.50 (!)
This scatter shield is the same I run on my OMNI. It has been tested to fit the 2.2L/2.5L engine family and A-520/A-555 and A-523/A-568.
In it's current configuration, it WILL NOT fit a A-413. One mounting tab would need to be moved. You may also want a wider unit for an auto?
It has not been physically tested to fit the T3 crank sensor, but from measurement testing, it should clear just fine.
It has not been physically tested on a T3 STOCK intake and throttle body configuration, and there looks to be SOME CLEARANCE ISSUES. The throttle body may need to be flipped over or otherwise modified.
This scatter shield includes a timing window cover. (2) bolts will need to be removed to take the cover off so you can see your stock trans timing window.
The scatter shield will come to you unpainted. That way you can choose what color you want and if you want to paint it or get it powdercoated (or leave it bare and oily like mine is).
Go here:
http://www.turbo-mopar.com/forums/sh...lds&highlight=
Or here:
http://www.turbo-mopar.com/forums/sh...l=1#post844921
For more info.
Here is the original mock up:
Here it is on my OMNI:
Here is the pre-production weight.
Here's a shot of it on a A-568:
Here is a shot with the timing window cover removed:
Here is a shot of the hardware you'll receive if you buy the hardware option:
Price will be $150 shipped (shipping limited up to $20....more than that and you'll pay the difference).
Hardware option will be an additional $20 and include all hardware necessary to install.
Payment in full is expected if you want one. Cut-off date for the first group of scatter shields to be made is February 1st, 2012. After that, they may or may not be available, and the price will most likely go up, as we are only buying enough material for the group buy posted here.
Post here and PM me for info on check, money order, or Paypal payments if you want one or more.
Disclaimer:
This is built to NHRA rules ONLY. It is in NO WAY guaranteed to save you or your car in the chance of a flywheel, clutch, flexplate, or torque convertor explosion. This will fit the above transmissions. It is NOT implied that it will fit your turbo, header, intercooler tubing combo, etc. Intercooler plumbing, radiator hoses, heater hoses, throttle bodies, intakes, etc, may need to be modified depending on your setup.
Thanks guys for the interest and motivation to make more of these
I'll be updating this orginal post with more fitment pictures soon. I'll be updating the thread with production pictures as production starts.
Here's what I have so far. Make sure you see your name and correct info below.
1) glhs727 - 1 - Hardware???
2) lengel - 1 - No timing window - WITH hardware - PAID - SHIPPED - RECEIVED
3) Turbo3Iroc - 1 - No timing window - WITH hardware - PAID - SHIPPED - RECEIVED - SHIPPED NEW HARDWARE - RECEIVED NEW HARDWARE
4) Onlooker - 1 - WITH Hardware - PAID - SHIPPED - RECEIVED
5) 168glhs1986 - 1 - WITH Hardware - PAID - SHIPPED - RECEIVED
6) Pat - 2 - WITH hardware - PAID - SHIPPED - RECEIVED
7) 4 l-bodies - 1 - NO hardware - PAID - SHIPPED - RECEIVED
8) BadAssPerformance - 3 - WITH Hardware - PAID - SHIPPED - RECEIVED
9) mcsvt - 1- WITH hardware - PAID - SHIPPED - RECEIVED
10) chilort - 1 WITH hardware but no shipping - PAID - RECEIVED
11) contraption22 - 1 - WITH hardware
12) T-Bohn - 1 - WITH hardware - PAID - SHIPPED - RECEIVED
13) 84omni - 1 - WITH hardware - PAID - SHIPPED - RECEIVED
14) onrippinturbo2 - 1 - WITH hardware - PAID - SHIPPED
15) rbryant - 1 - (NO hardware, no timing window) - PAID - SHIPPED
16) tommy - 1 - w/ hardware - PAID - SHIPPED - RECEIVED
17) Shmedley - 1 - WITH hardware - PAID - SHIPPED - RECEIVED
18) Shadow-1- With hardware and timing window - PAID - SHIPPED
19) Daver-1 - with hardware and timing window - PAID - SHIPPED
20) DOHCRT - 1 - No Hardware - PAID - SHIPPED