Omni GLHT door seals

[Dodgeglht]

Got an Omni GLH that has two ponds in the car. One on both front floor boards & I need to get it fixed. I think it's the door seals & am wondering if anyone knows where I can get replacements. It's not good at all to have a small flood on the floor of your car.

[tryingbe]

Send them a request. They'll produce it when they feel there are enough interest.

http://www.omnipotentparts.com/

[Dodgeglht]

Thanks,

I went ahead & emailed them.

[jaysshelby]

I'd check to make sure either your windshield or seams in the cowl could be leaking. 95% of the time its one of them.

[Dodgeglht]

Thanks for the tip Jay, I'll have to check that out.

[Dodgeglht]

Jay, Thanks for the tip. It looks like it is one of them. I had ice going down the carpet along the firewall. I brushed the snow off the windshield & cowl area & once if warms up I'll be removing the outer trim & looking it over. What's the best way to fix either of those areas when they leak?

[omniac]

I tried for the whole summer to fix water leak problems and my existing door opening mouldings - with no luck. I then discovered a set of dodge spirit mouldings fit great, you'll just need to trim them for size. The only issue if that they are black and not color co-ordinated for my interior - but I now have 0 leaks in the car and the mouldings look nearly stock

[fishcleaner]

I used a JC Whitney universal one and it worked, a little stiffer than OEM but usable.