1989 Horizon - Everything must go!

[Tbird232ci]

Happen to have a center arm rest?

[Badger]

just the one thats in the car....sorry.

[Nemesismachine]

No center armrest, have yet to own one that has that. Yes I have the bumper covers, which do you need?

[Nemesismachine]

Car is being cut up as we speak. It's gotta go, all of it. EVERYTHING IS OBO

Doors (exterior skins, I gutted the interiors) - $20 for all 4
GLH hood - $50
Hatch $50 w/good glass and defrost
Powdercoated black rear suspension - $100
Powdercoated black bumper - $75
FWDP Koni rear coilovers, never used - $500
Omni manual rack with conversion yolk - $100

edit - the rear suspension is the rear swing arm, whatever that huge part is called. I will throw in powdercoated rear disc brackets too. I have brand new parking brake cables to go with this, for an extra $25.

[Skibbe]

Interested in the manual rack with coupler. Can you ship to 60016 for the $100? (I see the rack listed at $75 in the original post).

What is included with the powdercoated rear suspension?

[SrtOmni]

Do you have the front bumper boots? The ones that cover up the mounts?

[BOOSTIFIED]

Pm sent.

[Nemesismachine]

Do you have the front bumper boots? The ones that cover up the mounts?

Yep, $10 shipped.

[Nemesismachine]

The doors come with the S&W aluminum door skins I started fabricating.

[16valvecharger]

will those coilovers work/fit on a 2 door lbody?

[Nemesismachine]

The rear coilovers are still available... Includes upper mounts and covers. $500 + shipping.

[Badger]

sorry. those rear powdercoated mounts....are these the body mounts that mount the body to the frame?

[Nemesismachine]

Those are the mounts from the car to the rear trailing arm.

[Nemesismachine]

Rear wiring harness $10 shipped

[168glhs1986]

Who built the cage? U selling cage and shell?

[Nemesismachine]

Cage was garbage. Just cut it out.

[Nemesismachine]

Front harness? Under the steering column. $10 shipped.

[Nemesismachine]

Who built the cage? U selling cage and shell?

Cage was garbage. Just cut it out. I'm cutting the floor out for my Rampage. You can have the doors if you want to drive up to Westminster.

[Skibbe]

Are the rear polybushings mounts the same for a 2dr L body?

Are you cutting up the shell? I could really use a passenger side trans mount, the part welded to the frame. You'd have to cut out a piece of frame to remove it, likely. But if the shell is going to the wrecker I'll pay top dollar!

Could also use a front motor mount bracket. The piece that bolts to the front crossmember, not the part that bolts to the motor.

[Nemesismachine]

Are the rear polybushings mounts the same for a 2dr L body?

Are you cutting up the shell? I could really use a passenger side trans mount, the part welded to the frame. You'd have to cut out a piece of frame to remove it, likely. But if the shell is going to the wrecker I'll pay top dollar!

Could also use a front motor mount bracket. The piece that bolts to the front crossmember, not the part that bolts to the motor.

I can cut the passenger side mount out with plenty of good meat to weld, sure. I have extra front brackets, too. $35?

I assume they're the same mounts for a 2 door L body, can any SC guys confirm that?