I'm looking for the cable that runs from the DRB II to the air bag diag. connector (Need DRB II to squib connector cable)
I'm looking for the cable that runs from the DRB II to the air bag diag. connector (Need DRB II to squib connector cable)
Last edited by CBMDennis; 12-21-2011 at 11:12 PM.
Still looking.
Do you know the part number for the cable? I'm pretty sure you can still buy new ones from OTC if you have the part number. I bought a DRB II and I can get it to work with the airbag on my 90 Imperial through the 6 pin connector under the drivers side of the dash. I'm guessing it needs to be hooked directly to the SRS module like the 88-89 cars, but does it use a special cable then just for the SRS? It does communicate with the Bendix 10 brake system though, which is why I really bought it.
84 Laser XE TII A555 89 Caravan SE TIV A568
It plugs into the air bag system it's self. I think its CCD Cable (P/N CC1020) that goes from the DRB II to the SRS. If found this info at http://www.wrenchmonkey.com/Webpages/DRB.html . The SRS manual I found at
http://www.wrenchmonkey.com/Images/DRB/SRS.pdf
Dennis
any one
I have a CCD cable you can borrow if you promise to send it back to me when you're done with it. You can still buy them from OTC from what I understand.
84 Laser XE TII A555 89 Caravan SE TIV A568
Found one on ebay