Well after owning this car for 4 years and only putting 8000km"s on it, it will go under the knife again. This time around it will have a 2.5 with Je forged pistons, holset He351 turbo, eagle H-beam rods, pt lifters, mp 318 valve springs, shelgame custom cal, 23x11x3 Fmic with 4" exhaust from turbo to left rear tire side exit. here are some pics of the progress so far, the block has been ground and polished on the inside and bored 30 over and installed piston/rods and used arp studs.