Page 17 of 27 FirstFirst ... 7131415161718192021 ... LastLast
Results 321 to 340 of 527

Thread: 3.0 Build Project: "Green Machine"

  1. #321
    Hybrid booster
    Join Date
    Nov 2011
    Location
    Central PA
    Posts
    306

    Re: 3.0 Build Project: "Green Machine"

    Quote Originally Posted by Reaper1 View Post
    I hope you were WAY ahead of them at 140+! Unless they were modded neither of those cars could even go that fast.
    Well the escort didn't keep up after about the first 2 miles. The guy in the neon stuck around the whole way though. He even snuck around me at what had to be at least 120. I couldn't hold him while staying in 5th. We were just messing around when we could during breaks in traffic. Both cars were modded with what appeared to be really basic bolt ons but you never really know for sure.


    Quote Originally Posted by Ondonti View Post
    Seems strange to me that his fuel is that lean with simple mods. Agreed on it being a bad thing for performance.
    Any Ideas what's going on? I'm still thinking the afpr will solve it but I won't know until I get it installed. If I didn't screw just screw up the trans, I'd be all over this lean issue.




    I sent RPW an email regarding interest in a set of adjustable cam gears. Hoping the shipping isn't as insane as I'm thinking it will be.... I paid 60 freakin dollars to ship an upper plenum to canada!

  2. #322
    Moderator Turbo Mopar Staff Vigo's Avatar
    Join Date
    Feb 2006
    Location
    San Antonio,TX
    Posts
    10,798

    Re: 3.0 Build Project: "Green Machine"

    As a current owner of a near-stock sohc neon, that one had significant mods. Mine takes friggin forever to hit 120 and probably wouldnt go much past it. My last lightly modded sohc neon seemed much quicker but was still slow in the 120mph range. My 3.0 dynasty was a lot faster accelerating through those speeds although i doubt it was MUCH faster in the 1/4 (ran the dynasty but never the neons). Im not sure why the neons seem so slow at 100+... you definitely ran into a fairly quick one if it was still able to accelerate at 120.

    Dont push the red button.You hear me?

  3. #323
    turbo addict Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,063

    Re: 3.0 Build Project: "Green Machine"

    1g neon does have great aero
    Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56

  4. #324
    Hybrid booster
    Join Date
    Nov 2011
    Location
    Central PA
    Posts
    306

    Re: 3.0 Build Project: "Green Machine"

    Ugh, tore into the trans a little bit to find this. I'm not sure what I'm gonna do yet. I guess I'm searchin for a good input shaft and reverse idler. I just had that trans down to put the lsd/clutch in and it's gotta come down again. Only had it running for 6 days! If I stumbled upon an A568 I'd consider a hybrid but that sounds costly and I've seen reverse gear carnage even with their "hardened" gears.

    Click image for larger version. 

Name:	003.jpg 
Views:	72 
Size:	481.9 KB 
ID:	42254

    Click image for larger version. 

Name:	007.jpg 
Views:	73 
Size:	492.4 KB 
ID:	42255

    Destroyed the reverse idler gear, and the reverse gear on the input shaft. I'm 99% sure that reverse wasn't fully engaged when I started wheel hoppin. fml. The car can still be driven forward but I don't think I'm smart enough to drive a car without reverse.

    Am I correct that the input shaft needs replaced? The FSM doesn't show how to dissassemble it and it looks like its basically one solid piece.

  5. #325
    turbo addict
    Join Date
    Jan 2006
    Location
    Hazelwood, MO
    Posts
    6,566

    Re: 3.0 Build Project: "Green Machine"

    Yes, you need a new input shaft. Make sure you get the correct one. It looks like you have an early transmission by the way the pitch on the gears are. If you can't find that input shaft, then you will have to find an entire gear-set and both shafts...basically a whole other transmission.

  6. #326
    Hybrid booster
    Join Date
    Nov 2011
    Location
    Central PA
    Posts
    306

    Re: 3.0 Build Project: "Green Machine"

    Quote Originally Posted by Reaper1 View Post
    Yes, you need a new input shaft. Make sure you get the correct one. It looks like you have an early transmission by the way the pitch on the gears are. If you can't find that input shaft, then you will have to find an entire gear-set and both shafts...basically a whole other transmission.
    Yeah its an early trans. 3.50fd from a 90 daytona. I have never heard of a 3.50fd a543 come stock in anything other than a 90-91 daytona so they can be tricky to find. I do have a line on one now but I need to make up my mind how I'm gonna fix this.

  7. #327
    Moderator Turbo Mopar Staff Vigo's Avatar
    Join Date
    Feb 2006
    Location
    San Antonio,TX
    Posts
    10,798

    Re: 3.0 Build Project: "Green Machine"

    If you're drag racing why dont you fix it with a 3.77 or 3.85 trans?

    Dont push the red button.You hear me?

  8. #328
    turbo addict
    Join Date
    Jan 2006
    Location
    Hazelwood, MO
    Posts
    6,566

    Re: 3.0 Build Project: "Green Machine"

    The FD is interchangeable because the gear stack can come off the intermediate shaft. You can find a 3.50 FD 523 and put the gear stack from a later 543 on it. I can't remember if the later gear stacks can go on the early shaft.

  9. #329
    Hybrid booster
    Join Date
    Nov 2011
    Location
    Central PA
    Posts
    306

    Re: 3.0 Build Project: "Green Machine"

    Quote Originally Posted by Vigo View Post
    If you're drag racing why dont you fix it with a 3.77 or 3.85 trans?
    I'm happy with the 3.50fd for a street car. I could potentially go with a different fd but for simplicity I'd rather stay 3.50.

  10. #330
    Moderator Turbo Mopar Staff Vigo's Avatar
    Join Date
    Feb 2006
    Location
    San Antonio,TX
    Posts
    10,798

    Re: 3.0 Build Project: "Green Machine"

    For simplicity you'd be swapping out a whole trans rather than mixing and matching one together, and at that point the install of a 3.50 vs 3.85 is identical.

    Dont push the red button.You hear me?

  11. #331
    Hybrid booster
    Join Date
    Nov 2011
    Location
    Central PA
    Posts
    306

    Re: 3.0 Build Project: "Green Machine"

    I've got a solid lead on a 3.50fd trans AND parts to rebuild my current one. If a 3.85 or 3.77 would have fell into my lap I may have went that route.

  12. #332
    Moderator Turbo Mopar Staff Vigo's Avatar
    Join Date
    Feb 2006
    Location
    San Antonio,TX
    Posts
    10,798

    Re: 3.0 Build Project: "Green Machine"

    Well getting the car fixed is the most important thing and FD ratio is just me being picky in your thread!

    Dont push the red button.You hear me?

  13. #333
    Hybrid booster
    Join Date
    Nov 2011
    Location
    Central PA
    Posts
    306

    Re: 3.0 Build Project: "Green Machine"

    Picked up a new DD today to take some pressure off my truck and allow me to tear into the shadow more. 3.0/A543 baby!

    Click image for larger version. 

Name:	3K73Lb3J55G45J25M4cauae73fa7b833a1d70.jpg 
Views:	80 
Size:	22.4 KB 
ID:	42395

    Started pulling the motor/trans in the shadow yesterday. After much deliberation I've decided, the goal for the shadow is to run a 13 second N/A pass w/full interior. Got a few things in motion right now and the pieces will all be coming together shortly.

  14. #334
    Hybrid booster
    Join Date
    Nov 2011
    Location
    Central PA
    Posts
    306

    Re: 3.0 Build Project: "Green Machine"

    Got alot of good wrenchin time in today.

    Click image for larger version. 

Name:	004.JPG 
Views:	85 
Size:	233.6 KB 
ID:	42414Click image for larger version. 

Name:	003.JPG 
Views:	81 
Size:	255.4 KB 
ID:	42415

    2 3.0's on engine stands? Maybe I'm doin this wrong?

  15. #335
    turbo addict Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,063

    Re: 3.0 Build Project: "Green Machine"

    At least you have someplace to keep it dry. Regarding your motor running lean, AFPR will probably be fine. Long term changes in the fueling seems to take forever and ever and ever. My Spirit was at 1% long term fuel correction after a long period of time (a few months without the ecu unplugged) even though 32psi base pressure and 30# injectors is mathematically not equal to stock injectors. I don't remember if DRB2000 shows active fuel correction (whatever its doing short term as the motor runs).
    Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56

  16. #336
    Hybrid booster
    Join Date
    Nov 2011
    Location
    Central PA
    Posts
    306

    Re: 3.0 Build Project: "Green Machine"

    Got the motor completely stripped down and found the torque plate I had made up last year. Finally getting around to using it!


    Click image for larger version. 

Name:	011.jpg 
Views:	80 
Size:	497.0 KB 
ID:	42533


    Trying to decide what I want to do about pistons. I've decided to go 10:1 but options are limited.

    "Rock" brand pistons from rockauto/ebay - $150 (Really don't wanna use cheap unproven pistons in such a demanding build)

    New OEM Mitsubishi Diamante Pistons $390 (Can't find these oversized so they're out, too much $$ for cast anyway)

    Used OEM Mitsubishi Diamante Pistons ~$50-$100 (cast, used, std bore size)

    Forged Venolia/Ross/Wiseco etc. $800-$900 (3 weeks downtime and HOLY $$$) Leaning towards this though.



    I think I'm going to order (1) OEM mitsu piston and send it too venolia and have them make me oversize forged versions. I really don't see any other viable option to meet my goals.

  17. #337
    Hybrid booster
    Join Date
    Sep 2010
    Location
    lower rainland b.c
    Posts
    409

    Re: 3.0 Build Project: "Green Machine"

    if your going 10:1 then it would be easy to have custom ones made. just send them the bore size and ring pack size you'd like and the compression height and a few other details they can sort out. because as far as i can tell the 10:1 pistons are just a flat top w/o dish anyway, right? still can dig up my wo# for you if you like, just got to find it.

  18. #338
    Hybrid booster
    Join Date
    Nov 2011
    Location
    Central PA
    Posts
    306

    Re: 3.0 Build Project: "Green Machine"

    Quote Originally Posted by shayne View Post
    if your going 10:1 then it would be easy to have custom ones made. just send them the bore size and ring pack size you'd like and the compression height and a few other details they can sort out. because as far as i can tell the 10:1 pistons are just a flat top w/o dish anyway, right? still can dig up my wo# for you if you like, just got to find it.
    Yeah 10:1's basically have an outline of the dish with virtually no depth, valve reliefs are quite shallow compared to the 8.9's. If you can find the work order # I can call venolia and maybe work out the details. That would save some time and money.

  19. #339
    turbo addict
    Join Date
    Jul 2007
    Location
    Niagara Falls, ON
    Posts
    7,548

    Re: 3.0 Build Project: "Green Machine"

    I keep looking at G54B pistons... there's one that's 3mm too tall with about that in dish... considering mowing one down flat to see.... hmmm wait.... that was maybe 3mm too tall on a setup I was considering with a nissan rod and an offset crank grind... not sure where they are in a "normal" motor.
    DD1: '02 T&C Ltd, 3.8 AWD. DD2: '15 Versa Note SV, replacing.. DDx: '14 Versa Note SV << freshly killded :( ....... Projects: '88 Voyager 3.0, Auto with shift kit, timing advance, walker sound FX muffler on 15" pumpers wrapped in 215/65/R15 H rated Nexens.... and a '95 phord escort wagon PnP head << Both may need to go :( ..... I like 3.0s ... so??? ... stop looking at me like I've got two heads!

  20. #340
    Hybrid booster
    Join Date
    Nov 2011
    Location
    Central PA
    Posts
    306

    Re: 3.0 Build Project: "Green Machine"

    Quote Originally Posted by RoadWarrior222 View Post
    I keep looking at G54B pistons... there's one that's 3mm too tall with about that in dish... considering mowing one down flat to see.... hmmm wait.... that was maybe 3mm too tall on a setup I was considering with a nissan rod and an offset crank grind... not sure where they are in a "normal" motor.
    I don't think I'm ready to get quite that experimental.

Similar Threads

  1. Sundance 6g72 "3.0 turbo build thread"(N/A DYNO SHEET pics inside)
    By Sundance 6g72 in forum 3.0L V6 Turbo Engines!
    Replies: 1859
    Last Post: 03-17-2016, 06:34 AM
  2. Project- LED "bar graph" style tach, thoughts?
    By mopar-tech in forum Electrical & Fuel System
    Replies: 10
    Last Post: 09-19-2011, 06:28 AM
  3. Replies: 116
    Last Post: 07-14-2011, 02:01 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •