i have 1986 omni glh turbo.
in the past week i have noticed when i turn the key(ignition) sometimes the fp when turn on and sometimes it would not(i would have to turn it off and turn it back on until i heard the fp.
any help would be appreciated!!!
i have 1986 omni glh turbo.
in the past week i have noticed when i turn the key(ignition) sometimes the fp when turn on and sometimes it would not(i would have to turn it off and turn it back on until i heard the fp.
any help would be appreciated!!!
Asd is part of the power module ( the computer in the driver fenderwell area) to my knowledge it cannot be changed without changing the power module. Check for loose connections. Check the ground on the fuel rail and make sure it has good contact.
thanks man!!!!! i may jump it with a relay a some wires.
Check grounds carefully, I had an 87 Z towed in for no start, one of the PM grounds when bad, he was complaining of intermittant issues prior. Also check the ignition switch.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
thanks guys for the info.the day it stopped working i drove my jeep xj home.the next day i unhooked the fuel pump and got 12 volts,so i hooked it back up .it woorks fine now.
i guess it was a bad connection
It stopped on me again. Im getting zero volts to fuse 10(coming from the pcm).zero a the coil so i asume its thr asd relay,so i jsut ordered one from
mopar for 135.00$