Spent some good quality time in the garage this past weekend. I was able to get the complete eninge bay refinished.
I started with 220 grit sandpaper to sand out any deep scraches. Then I went over the whole bay and scuffed it with a red scotch brite pad.
Then cleaned everything really good with some wax and grease remover.
I then put down a coat of SEM Black high build primer
Then mutliple coats of Brillant Black Pearl, used 3 of Duplicolor Perfect Match 8oz Spray Cans
Finished it off with a coat of SprayMax 2K Clear Coat, really slick product, you must wear a respirator when using!
The clear was more heavily applied where the metal will not be coverd by something.
This was all done with rattle cans.
I let it dry over night and then started re-assembly. Scuffed up and painted the brake booster, brackets, and all clips.
Car is looking soo good and I can't wait till the exterior is painted to match the quality of the engine bay.