Need help finding a part number

[TopDollar69]

I went to the local dealership yesterday in search of some part numbers, needless to say I was not successful in my search. The part number I'm looking for is the trim bezel that goes in the center console on an 89 LeBaron GTC convertible with a 5spd. Its the part that the rubber shift boot sits in. When the parts guy would look it up, all it would show was the console for a coupe, which looks like a Daytona console. Ive tried finding the part used, but 89 GTC convertibles with a 5spd are rare to say the least. It needs to be black in color, which I believe is specific to a GTC. I'm interested in the woodgrain part number as well, for another car. I was also wondering if there is a good place to look for NSI parts when you do find the part number.

Thanks,

Ben Huebner

[midohiomoparsource]

I have some of these out of normal Daytona/Coupes, as you know the convertible console is different where it meets the dash.
I am not sure if the plate you are talking about is the same.
Anyhow, I will go look and see if I can find anything stamped on them.

Matt

[TopDollar69]

The convertable part is completely different. I parted out an 89 TII GTC coupe to make my 89 GTC convertable, and the console is much wider in the convertable. Im guessing its different to cover up all the extra bracing thats part of the transmission tunnel on a convertable. For the meantime I cut the automatic one up so I could put the rubber boot in it, it doesnt look too bad, but I know it isnt the right part.

Thanks,

Ben Huebner

[TopDollar69]

Bump.

[midohiomoparsource]

If you still need this, I will try to remember to look tomorrow night at the convertible I just picked up.

Matt

[JDAWG]

Help?

[TopDollar69]

Im still in need. Top price payed for what I need.

Thanks,

Ben Huebner

[JDAWG]

---- i posted a parts diagram, oh well i will post it tomorrow again