Results 1 to 5 of 5

Thread: Some tuning help please

  1. #1
    turbo addict
    Join Date
    Sep 2008
    Location
    Salt Lake City UT
    Posts
    1,603

    Some tuning help please

    I am in the process of tuning my van with the t-smec and it seems that as i turn up the boost past 12psi i feel no power increase

    Any suggestions on what to try and adjust?

    Also i sometimes get the knock light from 4k rpm to 5k rpm but only if i go from a rolling start, never from a standing launch??

    any ideas for that one?

    Thanks!

  2. #2
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,463

    Re: Some tuning help please

    How far past 12PSI? Are you dragging the brakes to hold it at a certain RPM, recording your readings, and then adjusting accordingly?

  3. #3
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Some tuning help please

    What's your setup? What fuel? What turbo? Wideband?
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  4. #4
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    Re: Some tuning help please

    Quote Originally Posted by 1BADVAN View Post
    I am in the process of tuning my van with the t-smec and it seems that as i turn up the boost past 12psi i feel no power increase

    Any suggestions on what to try and adjust?

    Also i sometimes get the knock light from 4k rpm to 5k rpm but only if i go from a rolling start, never from a standing launch??

    any ideas for that one?

    Thanks!
    You also need to adjust the wastegate duty cycle. The stock table only goes up to the stock boost. Just follow approx the same slope. I usually use ~80%DC @ 18psi...

    EDIT: Hold on - I re-read. Do you mean you get no boost past 12psi? Or that the power at 16psi is no different than at 12psi?
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  5. #5
    turbo addict
    Join Date
    Sep 2008
    Location
    Salt Lake City UT
    Posts
    1,603

    Re: Some tuning help please

    Sorry i looked at my timing curve and the cal was taking out alt of timing after 12 psi and that helped! i just got back from running a 14.9 and a 15.0 on 14 psi at the track! With a happy 2.3 60' time

Similar Threads

  1. Tuning help
    By 1984rampage in forum EFI Tuning
    Replies: 1
    Last Post: 06-24-2009, 03:54 PM
  2. need help tuning!
    By WOP'R in forum Electrical & Fuel System
    Replies: 12
    Last Post: 09-26-2008, 11:15 AM
  3. I need some serious tuning help...
    By SpoolinGLH in forum Maintenance & General Tech
    Replies: 21
    Last Post: 05-28-2008, 11:53 PM
  4. Tuning it in
    By Dave in forum Electrical & Fuel System
    Replies: 5
    Last Post: 04-04-2007, 09:42 PM
  5. Tuning.......
    By SpoolinGLH in forum Maintenance & General Tech
    Replies: 6
    Last Post: 01-28-2007, 10:13 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •