Garage Sale: Silicone couplers, al pipes, SRT4 coilpack, PT ECM, lbody strut mounts

[rbryant]

Date: 04th September 2011
Username: rbryant
Full Name: Rich Bryant
City, State, Zip: Chandler, AZ 85226
Contact: PM


Description: Be very descriptive and accurate of the items to be sold.


Custom waterneck for SRT4 engine.
This uses a GM waterneck so it is much more flexible.
I was going to use this and then I changed my setup to have the waterneck on the #4 freezeplug.
It needs to have the holes drilled and tapped for the waterneck but it is an easy step to finish. They were initially drilled too large to tap and then filled back in with weld. I can drill and tap it if desired.

$50




PT turbo ECM with Vin. I thought I might need this at one point but I won't be using anything near stock electronics so I won't be.
SOLD




Various Silicone couplers, etc.
$12 for the 2.25" 90s and 45s.
$10 for the 2.25" hump hose.
$10 for the 2.5->2.25 45
$10 for the 2.75->2.25 90
$5 for the 3->2.5 reducer (it was trimmed a bit so it is short)
$12 for the 2.25" aluminum 90 pipes
$12 for the 3" 2' straight pipe.



KYB Lbody Strut mounts. Used 200 miles or so before my coilover conversion
SOLD

SRT4 Coilpack. from the 900 mile engine I bought (PT turbo wrecked at 900 miles).
$30



Mustang 60mm TB. I should have the sensors somewhere...
$30 with sensors, $20 without.



Stratus PS pump. $10. ( also have a new pulley for it for another $10)


Prices don't include shipping. Just let me know when you want and I will add it.
I ship priority mail or parcel post only.

-Rich

[Dr.Evil]

Just an FYI to the TIII guys, that coil pack works well with the TIII if you don't feel like sourcing a stock coilpack. You will just need the connector w/ pigtail to splice into the factory harness. Carry on.

[rbryant]

Don't be shy with offers.

I also have a full vented rear brake setup in another post.

[rbryant]

Bump, lets get this stuff out of my garage.

[moe44688]

I might buy the 60mm TB with all sensors. I'll have to talk to Lengel first and see what I would need to do to make it work on my custom intake mani for my TIII.

[supercrackerbox]

Interested in the strut mounts. PM sent.

[rbryant]

Strut Mounts Pending.

PT PCM sold.

-Rich

[rbryant]

Bump...

I still have silicone bends, the SRT4 coilpack, custom waterneck, and mustang TB.

-Rich

[rbryant]

Bump.

I still have the 2.25" couplers, throttle body, power steering pump (2 of them actually), and some non pictured stuff that I can add regular stratus 2.4l waterbox, Neon alternator, a ND TD alternator, etc.

-Rich

[rbryant]

Bump.

Make offers.

-Rich

[ol"blue]

pm sent on all couplers and pipes

[wheming]

Interested in all the 2.25 couplers and bends if not sold already.



my android sent this for me using Tapatalk...

[rbryant]

Interested in all the 2.25 couplers and bends if not sold already.

Wayne,

I am working with ol"blue but you are next in line.

-Rich

[wheming]

Gotcha. I saw he was ahead of me. No worries. Just let me kbow if anything is left.



my android sent this for me using Tapatalk...

[turzbo]

Interested in the 3"-2.5" reducer and the 2.5"-2.25" 45* coupler. Shipped to S4T 3W1. Thanks

[rbryant]

I have some offers pending on the couplers.

I am in the middle of moving so things are just nuts and I haven't been very quick to take care of things like this.

I promise to sort it all out this weekend.

Hopefully you guys can be patient for another day or two.

Thanks,

Rich