getting out of TM sale - 2.4/2.0 and 8v (inc. EURO parts)

[Austrian Dodge]

Date: 19th August 2011
Username: Austrian Dodge
Full Name: Andreas Kiesewetter
City, State, Zip: 1230 Vienna, AUSTRIA
Contact: a.kiesewetter@dieconsult.at
Price: as low as possible due to higher shipping from EU - OBO

After close to a decade and just before finishing my recent project I’m selling all of my TM parts.
To make a long story short: my turbo failed and i came across a 2.0 turbocharged RWD coupe, so EVERYTHING has to go.
Make sure to check in from time to time, as I’ll be updating the list from day to day.

-) ’92 Daytona IROC black chassis incl. complete bulletproof 2.4 swap, flocked dashboard, bucket seats (http://www.turbo-mopar.com/forums/sh...-sneak-preview)
PENDING

-) ’92 Daytona IROC red chassis missing engine harness and front EU headlights
everything else is there!! please ask for anything you'd like.
e.g. 260km/h speedo, front and rear seats, console, shifter + shifter cables for A568, carpet, door boards, EU taillights... $ open for offers $

EU oil to water cooler, the last one i have - SOLD

EU taillights complete - dirty but no cracks whatsoever - $200.00USD


another set of EU taillights complete - driver side one has a crack which has been glued, therefor another complete set (US assembly) comes with it for free!! - $200.00USD






'92 EU glass foglights - $80.00USD



'92 EU 260kph speedo - $140.00 USD


'92 EU foldable mirrors - $50.00USD (glass has been replaced on the driver side)



11" big brake caliper - $30.00USD ea. side


'92 Iroc leather steering wheel - $20.00USD (little piece of plastic lip on the cruise control button assembly is missing)


never shipped an airbag

[turbovanman²]

Say it aint so,

You killed a DBB bearing? Wow, you just upped me,

[MNmopar]

I'd like this (It's for daytona, correct?).

1 set of '92 amber turn signals - $40.00USD ea.

Also, if you have a set of EU head and tail lights I'd be interested in those as well.

pm me and we can talk about it.

[Austrian Dodge]

@simon:
well, actually a mismachined turbine housing killed it. this daytona somehow doesn't want to get 100% finished, like it's cursed.
maybe i'll keep the red chassis, just for the heck of it and will work on it someday....but it's more likely it'll go to the crusher.

@mnmopar:
a set of EU head and tail lights will go with the black chassis (deal is pending, waiting on confirmation), but i have another set of EU taillights though.
i'll get you a quote for everything

[BadAssPerformance]

Say it aint so,

Ditto! sorry to hear man

[turbovanman²]

@simon:
well, actually a mismachined turbine housing killed it. this daytona somehow doesn't want to get 100% finished, like it's cursed.
maybe i'll keep the red chassis, just for the heck of it and will work on it someday....but it's more likely it'll go to the crusher.

Sorry to hear and I know how you feel, lol.

[Austrian Dodge]

thanks for those kinds of words, i just think it's now the time to move on....so please buy my parts, don't want to throw them away!

updated with pics

[Austrian Dodge]

-) complete set of '92 US headlights - $50.00USD
-) set of '92 EU front headlights (drivers side cover has been changed to a US one because it was broken - didn't pass tech inspection because of the old one) - $80.00USD
-) two sets of '92 amber turn signals - $40.00USD ea.


-) A568 transmission - shifted perfectly fine, large spline - $400.00USD SHIPPED!



-) A555 transmission - shifted perfectly fine, large spline - $300.00USD SHIPPED!



-) two swirl cylinder heads - $40.00USD ea. ONE IS SOLD
-) two one-piece intakes incl. fuel rails and TB's - $30.00USD ea. ONE IS SOLD



-) two mitsu turbo's incl. swingvalve - $65.00USD ea. - one of them is still bolted to the manifold+head (picture above)



-) two alternators (90A and 120A) - $20.00USD ea.


-) powder coated red 8V valve cover (one piece gasket - not included) - SOLD
-) SHELBY valve cover (one piece gasket - not included) - $130.00USD
this one has a story behind it: http://www.turbo-mopar.com/forums/sh...F!!&highlight=
thanks again to all who made it happen that this valve cover has been delivered to my place at that time!!!! it's has been sitting on a shelf in my basement ever since.
buy a piece of recent TM-History


-) complete 2.5 T1 common blocks - $65.00USD ea.


-) STD size 2.2/2.5 clevite rod bearings NIB - $10.00USD
-) Misc. Parts (taking offers for anything you can see - might also be listed extra in this post)


-) '89 SMEC - $35.00USD


-) '89 new in the box, never used, orig. MOPAR PERFORMANCE S60 SMEC - SOLD

[Austrian Dodge]

-) ATP T3 .82 GT30 exhaust housing (5-bolt ford style), ceramic coated - SOLD

-) ATP 3" ultimate internal swingvalve (cast version), ceramic coated inside out - SOLD

-) GT30R 4" anti surge compressor cover - $100.00USD SOLD

-) aluminum fuel surge tank (holds about 6.5 litres) drilled and tapped 4 3/8" NPT on the bottom, 1 3/8" NPT on top for the return line - $80.00USD


-) Bosch 044 motorsport fuel pump (incl. AN8 fittings), basically new - $200.00USD


-) two Sabelt 4-point racing harnesses (FIA homologated till 2013) incl. all mounting hardware - SOLD

-) 2.0 Neon aluminum intake - ported a little, sandblasted and painted - $40.00USD

[Austrian Dodge]

-) two sets of 2.4 cams incl. cam gears - $50.00USD one set is sold





-) 2.0/2.4 rockers and lifters (came off a 135.000mile 2.4 engine) - $50.00USD


-) 2.7 V6 rocker arms - $80.00USD


-) 2.4 N/A valve cover - $35.00USD

-) 2.4 inner timing belt cover for hydraulic tensioner - $25.00USD



-) Haltech Platinum Sport 1000 ECU - $1200.00USD SOLD

-) complete wiring harness made for the Haltech and my 2.4 in a '92 daytona (completely new underhood wiring incl. lights, fuse box and all...) - went with the car

-) Common Block Underdrive Pulley + Distributor - $125.00USD
pulley has beend turned, drilled and tapped to be able to accept any aftermarket trigger wheel (used: http://www.034motorsport.com/034efi-...heel-p-52.html)
distributor has been modified to simulate cam signal - drilled and tapped M12x1 for use with any hall effect sensor
beside from the two sensors and the trigger wheel, this is everything you'd need to convert your 8V TM to use with any aftermarket standalone engine management system!


-) Caterhame Super7 Oilcooler incl. Sandwichplate (might need some adaption - never used it on a TM) - SOLD

that's everything i can think off my head right now. pictures of most of the stuff is in my gallery and i'll take pictures of everything else.
all prices are OBO, things need to go, so don't be shy

SHIPPING:
head lights and taillights ship for: $50.00USD
smaller and lighter parts (oil cooler, rockers, valve covers...stuff like that) ships for $30.00USD
mitsu turbo ships for: $65.00USD
those prices are based on the weight of each part, i'll refund if whatever the difference is, when it's cheaper!!

[Austrian Dodge]

UPDATED:
taken pictures of almost everything
prices lowered + shipping costs

[Egodriver71]

I am interested in the oil to water oil cooler.

What is shipping to Jacksonville, FL 32244?

[overboostmotorsports]

do you have repeaters for the daytona ?

[Austrian Dodge]

@Egodriver71: PM sent!

@overboostmotorsports: what do you mean by repeaters?

[overboostmotorsports]

fender mounted turn signals

Norm

[ChargedDust]

Put me down for the ATP 3" wastegate, depending on the shipping cost. My zip code is 11580, think you could get a price?

[Austrian Dodge]

PMs sent!

[Austrian Dodge]

updated with lowered prices, some items sold...

spend your tax return money on some usefull euro stuff

[Shelby]

Do you still have the head or the red valve cover?

[nvysion]

I'm interested in the folowing items (I live in france) :
11" big brake caliper - $30.00USD ea. side
A568 transmission - shifted perfectly fine, large spline - $400.00USD SHIPPED
two alternators (90A and 120A) - $20.00USD ea
powder coated red 8V valve cover - $30.00USD / if the deal fells through/
SHELBY valve cover - $130.00USD
STD size 2.2/2.5 clevite rod bearings NIB - $10.00USD
'89 new in the box, never used, orig. MOPAR PERFORMANCE S60 SMEC - $85.00USD