Date: 03rd August 2011
Username: jaysshelby
City, State, Zip: northern Ohio
Looking at selling my 83 Rampage with matching trailer.
I fully restored this truck back in 2007 finished in 2008 and have a full photo log of work. I bought this truck from a
little old lady with 45k miles on it. Since complete I've put just over 7500 miles on it.
truck was converted to turbo 2 with following mods:
86 SC engine harness converted to 87 GLHS specs, socketed LM with custom cal. with 18 psi of boost
87 Shelby Daytona rebuilt T2 short block- Clevite bearings, Hasting rings, MP oil pump, oil restrictor added
ARP head studs w/ MP 2006 head gasket
Custom 1 off Direct Connection valve cover
+20 injectors w/ adj. fuel press. reg.
upgrade to 3-wire O2 sensor
TU T2 turbo rebuilt with TU oil/coolant supply lines
1983 445 G-head fully ported with 1mm oversize valves in and out and MP valve springs
1984 HO carb'd cam with lightened cam gear
port matched 2 piece intake and ported exh. man.
Talon BOV
Full 3 inch exhaust w/ Direct Connection exh. tip
GLHS INDY Intercooler/radiator set up
A520 350 final ratio trans with heim joint rod shift set up.
T2/T3 hybrid clutch
poly bushing in all suspension areas
rebuilt manual steering rack
Koni front struts w/ MP lowering springs, KYB GR2 rear shocks
SC front brakes with cross drilled rotors, 87 CSX rear disc redrilled to 4 lug
added factory Daytona sun roof with factory drain tubes
added 86 style dash and 86 Laser XT black leather buckets, rest of interior is original
added MP head light covers and Direct Connection bed cover (also on trailer)
added 89 Factory radio with remote cd player
added 70 Cuda reverse light
added factory GLH driving light harness and switch for 94 minivan driving lights
added factory timed ignition light on steering column
86 GLHS gauge cluster
pillar pod w/ autometer 30 psi boost and cyberdyne a/f gauge
autometer oil press gauge under hood
inline fuel press gauge
Direct Connection steering wheel
17x7 Motegi MR-7 with Nitto tire
color is 1993 Viper red
rampage is a factory manual steering, non-ac and radio delete truck
The trailer
custom removable hitch for Truck to clear center exit exh.
trailer weighs 470 pounds
matching DC bed cover
interior of bed is rhino lined
KYB GR2 shocks
new suspension bushings
was state inspected and registered
I know price is the main question. Asking for $10,000.00 or best offer for both.
I'm know theres more stuff I have done but this is the condensed version.
attached are a few pics.
Reply With Quote
