Date: 28th July 2011
Username: 89Aries
Full Name: Nick Fritz
City, State, Zip: Hamilton, NJ 08610
Description: Done with this thread, check out my other sale thread...
http://www.turbo-mopar.com/forums/sh...!!!!&highlight=
Date: 28th July 2011
Username: 89Aries
Full Name: Nick Fritz
City, State, Zip: Hamilton, NJ 08610
Description: Done with this thread, check out my other sale thread...
http://www.turbo-mopar.com/forums/sh...!!!!&highlight=
Last edited by 89Aries; 10-22-2011 at 10:25 AM.
Bump.
Bump. Going to pull the head this week, will post some pics if anyone is interested.
Bump. Interest? Head looks great.
Ok pics of the head. Its not heavily ported, I would say its mildly ported at best and casting flash removed. Has 88 tbi roller cam, pt lifters and shims, stock valves and all 4 exhaust valves are stamped 't' for turbo so no worries. I'm sure someone is interested in it just pm me. Thanks guys
Bump. I need to sell this head asap!!! Shoot me a reasonable offer!!!!
$350 for cylinder head +shipping. Not good enough? Make me an offer. I need to move parts!!!!
1pc intake mani hemi orange ported and polished with stock fuel rail and regulator and matching hemi orange 1pc gasket type valve cover chrysler turbo
150 SHIPPED!!!
Good 782 head stock
120 SHIPPED!!!
87 daytona t2 bottom end complete painted hemi orange, most likely spun rod bearing cylinder walls look good
50 come get it or scrap
I need to move stuff guys!!! Check my other thread for more stuff!!!
http://www.turbo-mopar.com/forums/showthread.php?58566-USA-Tons-Of-Parts-Everything-Must-Go-LOOK!!!!&highlight=
Last edited by 89Aries; 09-27-2011 at 09:51 PM.
Need pics of the 2 piece, or it didn't happen...
=P
Here's a shot of the two piece and fuel lines and AFPR. Still need to get a shot of port work.
Here's the port work:Originally Posted by john1320
Come on guys!!!!!
That's a wonderful intake- ended up ordering my clutch and rear brakes yesterday, so i'm flat atm >.<
Someone buy this setup- everything's done for you already!
Please do! I'm not made of money, at least not anymore
Bump.
STILL FOR SALE!!!!!
1pc intake mani hemi orange ported and polished with stock fuel rail and regulator
100 SHIPPED!!!
Good 782 head stock
100 SHIPPED!!!
Good VNT Turbo complete with wastegate, turbo lines, and VNT specific exhaust mani with stamped N
150 SHIPPED!!!
Complete VNT 1pc intake mani with charge air temp sensor stock fuel rail and regulator and TB and VNT 1pc valve cover need paint
100 SHIPPED!!!
Help me out guys!!!! Shoot me offers if its too much.. I gotta move parts.
Last edited by 89Aries; 09-27-2011 at 09:50 PM.
$150 shipped for the built head with tbi roller cam?
Sorry, sold
Last edited by 89Aries; 09-27-2011 at 11:48 PM.
Bump. I'm losing storage and will be throwing parts out, if anyone is interested in anything send me a PM, make me a deal. Thanks guys
Re: Ported 782 Head Pt Lifters TBI Cam, 1pc, 2pc Int Mani, Exh Mani, AFPR, et
It has been 4 days now. What are we doing about the head you sold me with the broken off stud? I know you feel like it happened in shipment but I received the exact head from these photos. It has the RTV all over it, and it has one stud left in it. I feel like you knew this stud was broken off in the head since you took this photo from this angle so the broken stud is hard to see. I wouldn't have bought this from you if I'd have known it was damaged, repaired with a helicoil and then had a stud broken off in that same hole.
Posting Permissions
Reply With Quote
