Results 1 to 8 of 8

Thread: BoostButton Updated Latch Adapters for SBEC's

  1. 07-25-2011, 11:29 PM #1
    ShelGame
    ShelGame is offline
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918
    Send a message via Skype™ to ShelGame

    BoostButton Updated Latch Adapters for SBEC's

    I just got in new latch boards and components today and built the first one up. I had a customer in Eastern Eurpoe (no kidding) who asked if I could make the board smaller to fit his BMW ECU. So, I found a teensy tiny latch chip and figured out how to solder it to the board. These new boards are basically only a hair bigger than a chip.

    These also fix the issue some were having with the 27SF512 chip. So, if you have one of my original latch baords and want to upgrade, just send me PM and we'll work out an exchange.

    Unfortunately, there doesn't seem to be a fix for the Ostrich power problem (losing memory unless powered by the USB). I thought I had a fix, but it had no effect. Moates will have to help us figure that one out, I'm afraid.



    Again, these are for running a 'regular' chip on the SBEC - IE, a 27C256 (or 27SF512, or Ostrich) in place of the 87C257 that the SBEC normally uses. Apparently, this board works on BMW ECU's too...
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki
    Reply With Quote Reply With Quote
  2. 07-26-2011, 03:47 AM #2
    turbovanmanČ
    turbovanmanČ is offline
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167
    Send a message via MSN to turbovanmanČ

    Re: BoostButton Updated Latch Adapters for SBEC's

    Damn dude, your getting famous, congrats,

    I have one of the original adapters from Wowzer was it? Never used it yet but do they work?
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info
    Reply With Quote Reply With Quote
  3. 07-26-2011, 07:14 AM #3
    ShelGame
    ShelGame is offline
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918
    Send a message via Skype™ to ShelGame

    Re: BoostButton Updated Latch Adapters for SBEC's

    Quote Originally Posted by turbovanman View Post
    Damn dude, your getting famous, congrats,

    I have one of the original adapters from Wowzer was it? Never used it yet but do they work?
    Quantum made the original ones. As far as I know they work...
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki
    Reply With Quote Reply With Quote
  4. 07-26-2011, 02:12 PM #4
    turbovanmanČ
    turbovanmanČ is offline
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167
    Send a message via MSN to turbovanmanČ

    Re: BoostButton Updated Latch Adapters for SBEC's

    Quote Originally Posted by ShelGame View Post
    Quantum made the original ones. As far as I know they work...
    That's right, my memory is going,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info
    Reply With Quote Reply With Quote
  5. 07-29-2011, 07:39 PM #5
    zin
    zin is offline
    Supporting Member Turbo Mopar Contributor zin's Avatar
    Join Date
    May 2006
    Location
    ca
    Posts
    4,479

    Re: BoostButton Updated Latch Adapters for SBEC's

    Quote Originally Posted by ShelGame View Post
    Quantum made the original ones. As far as I know they work...
    I got one too... Think they'll still work with the inch of dust that has collected on it?

    Mike
    "The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry

    Bad laws are the worst sort of tyranny.
    - Edmund Burke
    Reply With Quote Reply With Quote
  6. 07-29-2011, 09:57 PM #6
    shackwrrr
    shackwrrr is offline
    turbo addict
    Join Date
    Feb 2010
    Location
    Piedmont, Ohio
    Posts
    4,109

    Re: BoostButton Updated Latch Adapters for SBEC's

    Yay, Mine going out soon?
    Ian Adams Function>Form 1990 shadow scrapped, too rusty:( 1991 Spirit R/T Scrapped, parts sold:( 1989 Turbo Caravan Daily beater with built-[I]ish [/I]​engine slowly evolving into weekend turbo beater.
    Reply With Quote Reply With Quote
  7. 07-30-2011, 08:22 PM #7
    ShelGame
    ShelGame is offline
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918
    Send a message via Skype™ to ShelGame

    Re: BoostButton Updated Latch Adapters for SBEC's

    Quote Originally Posted by shackwrrr View Post
    Yay, Mine going out soon?
    Went out on Wednesday. You should have it on Monday if it didn't come today...
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki
    Reply With Quote Reply With Quote
  8. 07-31-2011, 03:13 AM #8
    shackwrrr
    shackwrrr is offline
    turbo addict
    Join Date
    Feb 2010
    Location
    Piedmont, Ohio
    Posts
    4,109

    Re: BoostButton Updated Latch Adapters for SBEC's

    Quote Originally Posted by ShelGame View Post
    Went out on Wednesday. You should have it on Monday if it didn't come today...
    Awesome, Spirit is ready. Im not looking forward to dealing with the brown jello though.
    Ian Adams Function>Form 1990 shadow scrapped, too rusty:( 1991 Spirit R/T Scrapped, parts sold:( 1989 Turbo Caravan Daily beater with built-[I]ish [/I]​engine slowly evolving into weekend turbo beater.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. TIII distributor adapters-done!
    By turbovanmanČ in forum General Vendor Area
    Replies: 15
    Last Post: 02-24-2014, 12:53 PM
  2. part #'s for caliper adapters on a shadow?
    By bluneon in forum Suspension, Brakes, Wheels, Traction
    Replies: 2
    Last Post: 09-07-2009, 02:16 AM
  3. dizzy adapters anyone making them??
    By glhs502 in forum 2.0L/2.4L 16V Engine Swaps!
    Replies: 23
    Last Post: 06-05-2008, 09:50 AM
  4. WTB: Minivan caliper adapters
    By ScottD in forum Parts Wanted
    Replies: 6
    Last Post: 12-18-2007, 09:16 PM
  5. New Product- FuelPressure Regulator Adapters
    By Chris W in forum Turbos Unleashed
    Replies: 11
    Last Post: 06-11-2007, 09:58 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules