Date: 18th July 2011
Username: minigts
Full Name: Jon Trotter
City, State, Zip: Memphis, TN 38049
Contact: PM me and I'll provide phone and email.
Price: Prices listed below. All are cost + shipping unless otherwise noted. Paypal and MOs accepted.
Warranty: There are no warranties implied or otherwise associated with any of the parts for sale here. I will place insurance on all pieces for the price sold, but once it arrives safely, it is no longer my concern. If you have questions, concerns, need more pictures or information, please be sure to ask.
SOLD
Description: 2 Piece Intake $230 + Shipping OBO
Comes with all you see in the picture. Pulled from a "working car" after a wreck, but this was not damaged at all. Will include the air charge temp sensor and one vacuum nipple on the intake. Also comes with the fuel rail, injectors and a stock throttle body. The fuel rail and injectors were not on the car when it was running, so I cannot verify they work or the rail doesn't leak, please keep this in mind. I have no reason to believe they are faulty, but that is my disclaimer that they have not been tested. An extra AIS will be included if you want it. I pulled a few from the yard the other day and don't need the extras. Someone mentioned that shipping was like $25, so I would expect it to be close to that with insurance, which will be mandatory. Oh and the injectors will need o-ring gaskets. NM, found some! I had to steal some for my +20s. Cosmetically, this thing is in excellent condition. I hate to even sell it, but I'm going other routes.
SOLD
Description: 1 Piece Intake $40 + shipping
Bare 1 piece, no throttle body, no injectors, no fuel rail. Pulled when working, so again this has been tested. There seems to be some marks on the back side of the intake, pics below. I don't THINK it's been repaired, but hard to tell if those are knocks or what. Still, I know it works because it was on the car before the 2 piece up above. I have one extra set of injectors that I cannot confirm work or not, but if you want the extra set, add $10 to the price.
SOLD
Description: Factory stock IC $50 + shipping OBO
Part number is 4266978. Only cosmetic issues are the bend in the plate seen below and the paint. Otherwise, it's a good IC. Again, pulled from the car that the other parts above were on. If you need more pictures just ask. Comes with the brackets.
Description: Factory stock exhaust manifold $20, missing a stud, $10 + shipping OBO
Not too much to say about this one. I'm sure it's been on my car at some point. Missing one stud for the turbo. The other is stock as well and has all 4 studs.
Description: Factory roller cam with rollers and lifters $60 + shipping OBO
Pulled from working car when I got another head rebuilt. Comes with a squaretooth sprocket, rollers, lifters and the cam. If you don't need the cam, just be sure to let me know so I don't send it unnecessarily.
SOLD
Description: Factory NOS 525 Shifter Bushings $20 + shipping OBO
These I bought WAAAAY back when. Bought 2 sets and never used this one. They are still sealed in the bag and fresh.
Description: Stock TII Turbo $125 + shipping OBO
This came off my black car and spooled fine. The shaft has very minimal play, almost non-existent and will spin freely, although as you can see it is burning some oil. It's been over a year since I drove it with the TII Garrett, but I don't remember any smoking issues like lots of smoke. It has a small can on it, but I've hit 18+ psi with this turbo because of the headbolt shims on the back side of the actuator. I also have a stock 2.25" swingvalve I will send with it. It is attached, all 5 bolts are there. I also fixed one of the bolt holes that had a broken bolt in it, removed and re-tapped the hole. Comes with the oil return pipe as well. There are additional photos in another thread I have it listed for sale, will try to get pics of the full assembly and add here.
SOLD
Description: Bosch O2 sensors - 1 wire $15 each, 4 wire $25 + shipping OBO
I have new Bosch O2 sensors. I have 2 1 wire sensors and a 4 wire. The 4 wire has a connector kit, but I am not sure how it mates up to the stock harness. Please ask questions about this if you have any. ALL are brand new and have never been used. I did pull one of the plastic caps off to ship my wideband, but found another one that is a little larger. But all have covers and will be shipped with such.
Questions about any of the items, please ask.