Anybody got a 92-93 P-body 3.0 V6 engine harness? Don't need everything under the hood, just the engine harness. I have a turbo engine harness I can trade, or ...
Anybody got a 92-93 P-body 3.0 V6 engine harness? Don't need everything under the hood, just the engine harness. I have a turbo engine harness I can trade, or ...
not sure exactly what harness you need? I've got a few p-body 3.0 5speed cars for parts. I can cut you a good price on any wire harness you need.
when you say engine harness do you mean injector harness, alternator harness, starter harness, engine to pcm harness... there's quite a few different harnesses on the engine.
Don't need the injector harness, just need the harness on the engine that connects to the alternator and injector harness, and has three big plugs that connect it to the body harness near the battery. I think it connects to the oil pressure sending unit and speed sensor also.
Bump...
Still need this...
I'll see what's hanging off my semi dressed spare motor tomorrow... think it's '92 and came out of a P... possibility it's been hacked off/up and/or damaged though... had an alt, starter and oil sender still on it, so that end probably wasn't unplugged...
DD1: '02 T&C Ltd, 3.8 AWD. DD2: '15 Versa Note SV, replacing.. DDx: '14 Versa Note SV << freshly killded :( ....... Projects: '88 Voyager 3.0, Auto with shift kit, timing advance, walker sound FX muffler on 15" pumpers wrapped in 215/65/R15 H rated Nexens.... and a '95 phord escort wagon PnP head << Both may need to go :( ..... I like 3.0s ... so??? ... stop looking at me like I've got two heads!
As long as the main harness plugs and injector harness plug are there still, I can use it.
Bump...
No longer needed, found one in my stash
doh and
DD1: '02 T&C Ltd, 3.8 AWD. DD2: '15 Versa Note SV, replacing.. DDx: '14 Versa Note SV << freshly killded :( ....... Projects: '88 Voyager 3.0, Auto with shift kit, timing advance, walker sound FX muffler on 15" pumpers wrapped in 215/65/R15 H rated Nexens.... and a '95 phord escort wagon PnP head << Both may need to go :( ..... I like 3.0s ... so??? ... stop looking at me like I've got two heads!
Hehe yeah, and that was after I bought one at the PAP that didn't work lol. But, the correct one I had needed the injector harness plug replaced (the minivan harness was like that also, must be a common 3.0 problem) and the new harness had mint wires, so it worked out. I got a new 4-wire O2 sensor in the deal too
Now I just need a starter/trans harness...