Results 1 to 12 of 12

Thread: 2.5 TBI Engine needed

  1. #1
    Garrett booster
    Join Date
    Aug 2009
    Location
    detroit mi.
    Posts
    158

    Thumbs up 2.5 TBI Engine needed

    My 92 shadow DD has 235 000 miles and the no.1 oil ring is shot head was just replaced by me in November because of warped valve same cylinder. The engine runs fine drives 70 miles a day to work but starting to drink oil and valve is getting bad again need A good low mile complete motor or short block would prefer to hear it running Thanks

  2. #2
    Garrett booster
    Join Date
    Sep 2010
    Location
    Peoria, AZ
    Posts
    161

    Re: 2.5 TBI Engine needed

    ive got a good running 2.5 im pulling out of my car here soon to put my new motor in. im about 5 hours north of you however... if you drive like me about 4 hours tho

  3. #3
    Garrett booster
    Join Date
    Aug 2009
    Location
    detroit mi.
    Posts
    158

    Re: 2.5 TBI Engine needed

    how many miles does it have on it

  4. #4
    Garrett booster
    Join Date
    Sep 2010
    Location
    Peoria, AZ
    Posts
    161

    Re: 2.5 TBI Engine needed

    130k.

  5. #5
    Garrett booster
    Join Date
    Aug 2009
    Location
    detroit mi.
    Posts
    158

    Re: 2.5 TBI Engine needed

    sounds good and how much if you pref.you can pm.me

  6. #6
    Garrett booster
    Join Date
    Sep 2010
    Location
    Peoria, AZ
    Posts
    161

    Re: 2.5 TBI Engine needed

    pm sent

  7. #7

    Re: 2.5 TBI Engine needed

    I've got ½ dozen good running 2.5 tbi's $150 located in WI.

    What's a 'warped valve'... That's a new one on me and I've had over 200 2.2/2.5 mopars over the years

  8. #8
    Garrett booster
    Join Date
    Aug 2009
    Location
    detroit mi.
    Posts
    158

    Re: 2.5 TBI Engine needed

    Quote Originally Posted by 22mopar View Post
    I've got ½ dozen good running 2.5 tbi's $150 located in WI.

    What's a 'warped valve'... That's a new one on me and I've had over 200 2.2/2.5 mopars over the years
    cracked and warped exhaust valve it happens because the oil ring is broke and the oil in the cylinder gets on the hot exhaust valve and damages it

    ---------- Post added at 01:40 PM ---------- Previous post was at 01:35 PM ----------

    need one closer to Detroit no truck

  9. #9

    Re: 2.5 TBI Engine needed

    that's a burned valve.

    I've been building engines for over 30 years, at least 10 2.2/2.5's per year... and I've never had a failed ring cause a "warped" valve.

  10. #10
    Garrett booster
    Join Date
    Aug 2009
    Location
    detroit mi.
    Posts
    158

    Re: 2.5 TBI Engine needed

    Quote Originally Posted by 22mopar View Post
    that's a burned valve.

    I've been building engines for over 30 years, at least 10 2.2/2.5's per year... and I've never had a failed ring cause a "warped" valve.
    I am open for suggestions second head second valve same no 1 cylinder saturated with oil even runs smooth as a kitten for six months until it burns out and starts skipping again but uses oil

  11. #11

    Re: 2.5 TBI Engine needed

    Cant arm chair internet solve your problem with all the facts and ability to utilized all my trained senses.. in otherwords, I'd have to see this one in person do make a proper, rational and pragmatic diagnosis.

  12. #12
    Garrett booster
    Join Date
    Aug 2009
    Location
    detroit mi.
    Posts
    158

    Thumbs up Re: 2.5 TBI Engine needed

    I just want to say Brett is a GREAT guy to do business with I went a long way to pick up this motor and I am so happy it runs awesome it is so quiet that you only hear the alternator bearings I did not know how to post this in the Positive section.this is my work car it now runs better than my T1 spirit and that's saying a lot since it is babied a lot.He is working on his hybrid and I can't wait to do more business with him he will go far and be successful

Similar Threads

  1. Engine 2.5 TBI Motor needed
    By BIG PSI in forum Parts Wanted
    Replies: 7
    Last Post: 04-11-2010, 08:02 AM
  2. General TBI engine and sub harness
    By kwiksilver in forum Parts For Sale
    Replies: 1
    Last Post: 04-06-2010, 03:56 PM
  3. '93 P-body TBI "Instrument panel to engine wiring" diagram needed
    By mcsvt in forum Electrical & Fuel System
    Replies: 4
    Last Post: 02-02-2009, 09:32 PM
  4. Engine TBI engine
    By 1985ShlbyChrger in forum Parts Wanted
    Replies: 3
    Last Post: 05-16-2008, 01:26 AM
  5. NEEDED: 5spd TBI
    By Dave in forum Cars
    Replies: 0
    Last Post: 10-16-2006, 01:58 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •