1989 Dodge Caravan Turbo, 5 x 100mm, does anyone know where we can get a rear brake drum hub? I can't see it as a servicable part from any local stores or anywhere online? Outside from a junkyard does anyone know where we can get one?
If we have to go junkyard hunting, is it only 1989 and 1990 model years or what years/models would be compatible?
Thanks guys.
I have a pile of them. so I guess you can get them from my collection.
Be wary of 88 up grand caravans and anything that looks like it had a factory towing package, they might have been the 115ish x 5... not sure when 5 bolt started but should be the same all the way back until you start counting 4 bolts on 'em.
DD1: '02 T&C Ltd, 3.8 AWD. DD2: '15 Versa Note SV, replacing.. DDx: '14 Versa Note SV << freshly killded :( ....... Projects: '88 Voyager 3.0, Auto with shift kit, timing advance, walker sound FX muffler on 15" pumpers wrapped in 215/65/R15 H rated Nexens.... and a '95 phord escort wagon PnP head << Both may need to go :( ..... I like 3.0s ... so??? ... stop looking at me like I've got two heads!
There is a 91 & 2 93 caravans in the akron PAP. Also, 2 91 & 2 93 voyagers.
Bryan
86 GLHS #161, 2016 Impala
SDAC National Member, SDAC Buckeye Chapter Member
A man has got to know his limitations.....
Excellent. We're going to Pull a Part on Tuesday then. Thanks guys.
yar, 2nd gen 2.5s and 3.0s are likely to have 5x100 hubs too.
DD1: '02 T&C Ltd, 3.8 AWD. DD2: '15 Versa Note SV, replacing.. DDx: '14 Versa Note SV << freshly killded :( ....... Projects: '88 Voyager 3.0, Auto with shift kit, timing advance, walker sound FX muffler on 15" pumpers wrapped in 215/65/R15 H rated Nexens.... and a '95 phord escort wagon PnP head << Both may need to go :( ..... I like 3.0s ... so??? ... stop looking at me like I've got two heads!
GM uses 115mm. Dodge uses 114.3mm which = 4½"
this bolt patern was mostly found on 3.3 and 3.8L vans. however there is really no rhyme or reason what pattern gets used on each van. I've got a 1999 3.3 flex fuel grand caravan that has 100mm bolt pattern.
I' ve got a PILE of 1986-1990 minivan rear hub assemblies including turbo stick vans. if you want a hub assembly (drum, hub, spindle, brake backing plate) let me know CHEAP prices.
when you go get me a washer for the front cv joint i use one from the daytona on your brother neon when he was doing the wheel bearings.i think he has been to busy or forgot. thanks .the one behind the big nut.
You need that washer behind the cv shaft nut? how many, I've been throwing them away. must have over 100 of them in my scrap bolt pile.
yes we were working on dave brothers car and he had left it out so i gave him one off my daytona to use , he works all the time and we have not got another one yet . getting ready to put the axkes back in. thanks alan shiplett 805 bob st canal fulton ohio 44614
Thanks again to Al for coming out and knocking the outer races out. Got the hub from the junkyard.
anytime
Posting Permissions
Reply With Quote