My 90 shelby is really pissing me off. I just started driving it again the other day. The tack decides when it wants to work all the time but I already tried all the fixes and am more concerned about the other issues. My check engine light seems to no longer function. The check guages doesn't light up either but I don't remember if that does when you key it on or not. The voltage guage decided to not work anymore but it was the other day. The temp guage seems to have stopped as well since today. I pulled the cluster out and tried different bulbs even though they didn't look blown. Took my parking light bulb and holder and swapped it into the check engine spot since I knew that worked and still nothing. Reflowed every solder joint on the back of the cluster board. Still no luck. Swapped in an extra body computer I have. No luck. Swapped in a spare SBEC no luck. Unplugged, inspected the wiring harness that runs across the front of the engine from by the battery. Uhhhghhhh. Im gonna try to run a wire from the battery pos to the 1 side of the check engine light and ground the other just to verify it works and then I guess back track.