I found out my first batch of SCI cables may have an issue if used to flash an SBEC. The problem is, I don't know which ones i made bad, and which are OK. I made a new run of boards that fixes the issue. The issue is ONLY related to flashing an SBEC. If you are using the cable for datalogging or for flashing a SMEC, you should not have any problems.

I'm replacing the board section of the cable for free if you choose to have it done. You'll obviously need to send the cable back to me so I can retrofit the new board.

Send me a PM if you want it done and we'll set it up.