Show off your L bodies!!

[cordes]

....would you like to know where it came from?

Sure.

[martabo]

Sure.

Ordered it from Summit. Its a grant signature series 5673 with the ground plate slightly modified (i dremelled notches) to clear the six mounting bolts.

[BOOSTIFIED]

Anyone have a pic of there GLH with 225 tires on.. prefer from the back shot or side so I can see the stance.. and any clearance issues? thanks

[cordes]

Ordered it from Summit. Its a grant signature series 5673 with the ground plate slightly modified (i dremelled notches) to clear the six mounting bolts.

Thanks for the info. I'll have to give one of those a try shortly.

[roachjuice]

Little night driving tonight.

[82 Rampage]

Posing for her 1st good picture since I got her back on the road today!

[omni_840]

^Very nice! I'm digging the polished Lemans

[JohnnyIroc]

Put the Shelby badge on today and the Shelby motor sports decal of eBay was not to happy with the clear outline I'm gonna try and cut out just the letters

[cordes]

Dang. Awesome pics guys, thanks for posting them up.

[turbomini]

hey if anyone wants a gas cap for a charger you can get them at oreilly's for a cheap deal, and they look like the factory one's. here is a picture

the part numbers 6815 the line code is MCS there 8.99,


and if you want rear shocks for a 2 door L body have the person look up a 82, 024 and they will be the right one's, part number 71204 line code MON

[martabo]

hey if anyone wants a gas cap for a charger you can get them at oreilly's for a cheap deal, and they look like the factory one's. here is a picture

the part numbers 6815 the line code is MCS there 8.99,


and if you want rear shocks for a 2 door L body have the person look up a 82, 024 and they will be the right one's, part number 71204 line code MON

I sell these at work, as well.


HOWEVER, now that I have purchased coilovers, that is the only option in my book!

[turbomini]

i agree but i have 1 charger thats pretty clean and factory so i looked the stuff up

[168glhs1986]

Sdac 23 Autocross champ.

[martabo]

i love the wheel and tire combo. looks like what i had on my short-lived infatuation with a mini:

[DevoBuzz]

hey if anyone wants a gas cap for a charger you can get them at oreilly's for a cheap deal, and they look like the factory one's. here is a picture

the part numbers 6815 the line code is MCS there 8.99,

Do you know if there is writing on the top of that cap - something like "OPen slowly"? I have seen similar ones that also have a hole in the top since they use the same cap for the locking version. Trying to find out if this cap is actually the same as original or not. Thanks

[martabo]

The stant ones have letters, but no hole. At least, they didnt 5 years ago

[martabo]

1/4" wheel spacers in the back. MAJOR non hp gaining upgrade. prolly gonna go for a 4 or 5mm spacer for the front, too!

[Vigo]

Yeah, pretty much all these T-Ms need spacers in the back. Im trying to decide how much for my Lancer Shelby right now. Im guessing you're still on stuck studs and nuts since it is only 1/4"?

Looks pretty good. I love the older style tails. They are about 5x cooler than the later "common" ones.

[BoostedDrummer]

Posing on the taxiway here on base :P

[martabo]

Yeah, pretty much all these T-Ms need spacers in the back. Im trying to decide how much for my Lancer Shelby right now. Im guessing you're still on stuck studs and nuts since it is only 1/4"?

Looks pretty good. I love the older style tails. They are about 5x cooler than the later "common" ones.

yep. stock studs nice chrome nuts.

and i <3 the 83 lights, too.