Results 1 to 10 of 10

Thread: Full wiring (both dash and underhood) wanted

  1. #1
    Mom Says I'm Special. :-) Turbo Mopar Staff Subliminal's Avatar
    Join Date
    Dec 2005
    Location
    Princeton, NJ
    Posts
    1,777

    Full wiring (both dash and underhood) wanted

    Hey guys,

    I'm getting tired of messing around with wiring conversions for my 85 600es.

    I'm thinking this is what I need: 1985-1987 wiring harness for both underhood and underdash. I don't want to mess around with any cutting/splicing of wires, past doing the t1 to t2 conversion for the ais and tps.

    I'd also like it to be in good shape, and have all the sensors and fuse block and relays and what not.

    Anyone have anything?
    Damon

    "America is all about speed...hot, nasty badass speed."
    -Eleanor Roosevelt

  2. #2
    Hybrid booster
    Join Date
    Dec 2005
    Location
    Carlisle, PA
    Posts
    414

    Re: Full wiring (both dash and underhood) wanted

    an 87 TI LeBaron harness should fit perfectly, then no TPS conversion and that will give you an underhood map. This is the same harness I'm putting in my 86 TBI Reliant to convert it over to Turbo. You should only need the underhood harness, the bulkhead and underdash should be the same between the 600 and the 87 Lebaron.

  3. #3
    Mom Says I'm Special. :-) Turbo Mopar Staff Subliminal's Avatar
    Join Date
    Dec 2005
    Location
    Princeton, NJ
    Posts
    1,777

    Re: Full wiring (both dash and underhood) wanted

    Actually, the 87 harness would have 50 pins, while the 85 in my 600 has 40.

    This type of thing is why I'd like both together.

    Thanks, though!
    Damon

    "America is all about speed...hot, nasty badass speed."
    -Eleanor Roosevelt

  4. #4
    Hybrid booster
    Join Date
    Dec 2005
    Location
    Carlisle, PA
    Posts
    414

    Re: Full wiring (both dash and underhood) wanted

    Ok, I'm glad you told me then. Haha Did you have a good time at the Carlisle car show?

  5. #5
    Mom Says I'm Special. :-) Turbo Mopar Staff Subliminal's Avatar
    Join Date
    Dec 2005
    Location
    Princeton, NJ
    Posts
    1,777

    Re: Full wiring (both dash and underhood) wanted

    Yeah, it was fun. Dogs got too hot, though...and I had to leave early. I think the wife was happy about that one though. She likes the cars, but not the parts booths!

    BUMP for wiring harnesses!
    Damon

    "America is all about speed...hot, nasty badass speed."
    -Eleanor Roosevelt

  6. #6
    Resident Nuke Turbo Mopar Contributor denviola's Avatar
    Join Date
    Dec 2005
    Location
    Middletown, Pa.
    Posts
    473

    Re: Full wiring (both dash and underhood) wanted

    Quote Originally Posted by Subliminal
    Yeah, it was fun. Dogs got too hot, though...and I had to leave early. I think the wife was happy about that one though. She likes the cars, but not the parts booths!

    BUMP for wiring harnesses!
    Prob late on this one, however if you want to come and pull these harnesses, you can have them for free. The engine harness is only conncted to the starter, and while it doesn't look the best it is intact and the car was running when I started to disassemble.. The underdash harness is still in place. I did cut one of the wire groups going to the digital dash, the small one 4 or 6 wires since I couldn't get the connector apart in the teeny amount of space.
    I'm trying like heck to get done so I can leave for Topeka Monday, so I'm not pulling them until much later.
    Did I mention free?
    SDAC Member, Steel City Chapter SDAC Member, SV-SDAC member, SV-TD Member
    www.sv-td.com
    85 600 ES Turbo Conv., 91 Spirit R/T
    2014 RAM Laramie Longhorn Crew Cab Dually. 6.7 CTD, AISIN, 4.10 gear
    68 GS400 (owned since 1973, someday 455)
    2012 Can-AM RT Limited

  7. #7
    Mom Says I'm Special. :-) Turbo Mopar Staff Subliminal's Avatar
    Join Date
    Dec 2005
    Location
    Princeton, NJ
    Posts
    1,777

    Re: Full wiring (both dash and underhood) wanted

    Thanks man, but 6 hrs is a little long for me to drive 2 weeks in a row!

    Thanks for the offer, though...I'll keep that in mind!
    Damon

    "America is all about speed...hot, nasty badass speed."
    -Eleanor Roosevelt

  8. #8
    Hybrid booster
    Join Date
    Dec 2005
    Location
    bethlehem pa
    Posts
    765

    Re: Full wiring (both dash and underhood) wanted

    i know we have an under hood have to check for under dash

  9. #9
    Mom Says I'm Special. :-) Turbo Mopar Staff Subliminal's Avatar
    Join Date
    Dec 2005
    Location
    Princeton, NJ
    Posts
    1,777

    Re: Full wiring (both dash and underhood) wanted

    Thanks man, but i got the beast running yesterday. I think I might be good w/ the smec harness I have!
    Damon

    "America is all about speed...hot, nasty badass speed."
    -Eleanor Roosevelt

  10. #10
    Mitsu booster
    Join Date
    Dec 2005
    Location
    Regina,Saskatchewan
    Posts
    12

    Re: Full wiring (both dash and underhood) wanted

    in case that the car doesn;t run good, I have the 88 t-2 harness from my 85 lebaron gts that I'm trying to sell. worked perfect in my car. if needed, just PM me

    Steve Z

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •