Results 1 to 11 of 11

Thread: Shelby Lancer/Lancer Shelby hatches + misc

  1. #1
    Moderator Turbo Mopar Staff speeddemon's Avatar
    Join Date
    Dec 2005
    Location
    Windsor
    Posts
    343

    Shelby Lancer/Lancer Shelby hatches + misc

    I've got two hatches sitting in the basement.

    1 from a '87 Shelby Lancer.

    1 from a '88 Lancer Shelby (white). This has the factory modifications to accept the high mounted air deflector that was standard on the Lancer Shelbys.

    The spoilers are somewhere around.

    Both have been stored inside in the basement for a number of years. I don't see on working on a Lancer anytime soon. Both have some rust on the lower hatch edge (where you would grab to lift it).

    There are some other Lancer pieces around, steer wheel and column (not Shelby Lancer), taillights, ground effects, a full Shelby Lancer cloth interior (front/rear seats and door panels) in really good condition last time I saw it.

    I don't know what any of the stuff is worth as the Lancers don't seem to be that popular with the restoration crowd. I'd need to get a couple hundred for the interior and some cash for the ground effect pieces. Hatches and other loose items are free if you come and get them. May be talked into shipping some pieces but, they will ship from Windsor Ontario. Note that the interior is in the Detroit area.

    I hope these would go to somebody with a Lancer and not spun off on Ebay. You'll burn my bridge to you in the Turbo Mopar community if I catch ya.

    I'll try to get some pictures up towards the end of the week.
    Craig
    SDAC Board Member
    1985 GHLT
    1986 GLHS 047
    2005 SRT4 ACR

  2. #2
    Garrett booster
    Join Date
    Feb 2006
    Location
    Fayette City, PA
    Posts
    140

    Re: Shelby Lancer/Lancer Shelby hatches + misc

    What would you be willing to sell the door panels for Including the chrome door pieces upon seeing pictures if you have any. Thank you.

  3. #3
    Banned Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Windsor, Ont CANADA
    Posts
    3,805

    Re: Shelby Lancer/Lancer Shelby hatches + misc

    hey craig. im doing a lancer. im in need of interior!!!!
    but I dont have any $$$ at this time.....i know youve had this stuff for some time....

    lmk, maybe we can work something out?

  4. #4
    Moderator Turbo Mopar Staff speeddemon's Avatar
    Join Date
    Dec 2005
    Location
    Windsor
    Posts
    343

    Re: Shelby Lancer/Lancer Shelby hatches + misc

    Quote Originally Posted by ShelbyLancer455 View Post
    What would you be willing to sell the door panels for Including the chrome door pieces upon seeing pictures if you have any. Thank you.
    Not going to separate, sorry.

    ---------- Post added at 07:46 PM ---------- Previous post was at 07:45 PM ----------

    Quote Originally Posted by Juggy View Post
    hey craig. im doing a lancer. im in need of interior!!!!
    but I dont have any $$$ at this time.....i know youve had this stuff for some time....

    lmk, maybe we can work something out?
    PM me if you have something in mind...
    Craig
    SDAC Board Member
    1985 GHLT
    1986 GLHS 047
    2005 SRT4 ACR

  5. #5
    Garrett booster
    Join Date
    Sep 2011
    Location
    Jacksonville, Florida, United
    Posts
    84

    Re: Shelby Lancer/Lancer Shelby hatches + misc

    Could you take a pic of the mounting for the Lancer Shelby upper wing? I'm adding one to a Shelby Lancer and I'm not sure where to drill...

  6. #6
    Moderator Turbo Mopar Staff speeddemon's Avatar
    Join Date
    Dec 2005
    Location
    Windsor
    Posts
    343

    Re: Shelby Lancer/Lancer Shelby hatches + misc

    Hatches are gone - I'll see if the buyer can take some pictures of Lancer Shelby hatch for you.
    Craig
    SDAC Board Member
    1985 GHLT
    1986 GLHS 047
    2005 SRT4 ACR

  7. #7
    Banned Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Windsor, Ont CANADA
    Posts
    3,805

    Re: Shelby Lancer/Lancer Shelby hatches + misc

    Quote Originally Posted by Egodriver71 View Post
    Could you take a pic of the mounting for the Lancer Shelby upper wing? I'm adding one to a Shelby Lancer and I'm not sure where to drill...
    I will get some pictures and try to take some measurements for you as well!!! I was going to install the wing onto a non shelby hatch but it will be much easier for me to take the existing hatch here and have it painted to match the car!!!

    def a PITA !!! anyway i will get those pics for you sometime this evening


    and craig check your PM's!!!!

  8. #8
    Garrett booster
    Join Date
    Sep 2011
    Location
    Jacksonville, Florida, United
    Posts
    84

    Re: Shelby Lancer/Lancer Shelby hatches + misc

    Thanks guys!!!

  9. #9
    Banned Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Windsor, Ont CANADA
    Posts
    3,805

    Re: Shelby Lancer/Lancer Shelby hatches + misc

    sorry for the delay. ill get those pics for you this morning
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSC03963.jpg 
Views:	114 
Size:	191.6 KB 
ID:	34437   Click image for larger version. 

Name:	DSC03964.jpg 
Views:	121 
Size:	211.6 KB 
ID:	34438   Click image for larger version. 

Name:	DSC03965.jpg 
Views:	121 
Size:	184.5 KB 
ID:	34439   Click image for larger version. 

Name:	DSC03966.jpg 
Views:	113 
Size:	137.7 KB 
ID:	34440  
    Last edited by Juggy; 10-09-2011 at 09:09 AM.

  10. #10
    Banned Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Windsor, Ont CANADA
    Posts
    3,805

    Re: Shelby Lancer/Lancer Shelby hatches + misc

    the outer holes are 3/8 or 10mm. the inner holes are 1/2". as u can see it seems this hatch is missing one of the threaded bosses so I will have to figure something out. the holes were pretty much 2.5" from the roof line of the hatch, except for the last pic where u can see its off slightly.

    the 2 threaded boss holes are 2.25" apart. i couldnt measure the distance off the center to outer holes, but im sure you can double check measurements off the wing!
    hope this helps.

  11. #11
    Garrett booster
    Join Date
    Sep 2011
    Location
    Jacksonville, Florida, United
    Posts
    84

    Re: Shelby Lancer/Lancer Shelby hatches + misc

    Yes it does!!!

    Thanks!!!

Similar Threads

  1. Replies: 24
    Last Post: 11-25-2013, 11:52 PM
  2. General Spring Cleaning T3 Parts, Shelby Lancer wheels, misc.
    By ShelbyLancer455 in forum Parts For Sale
    Replies: 4
    Last Post: 06-24-2009, 02:16 AM
  3. Electronics Shelby Lancer Fog Lights, Shelby Lancer/Lancer/Lebaron GTS 12 Button Navigator
    By 1983Rampage in forum Parts For Sale
    Replies: 8
    Last Post: 02-10-2009, 09:51 PM
  4. WTB: lancer Shelby/Shelby Lancer parts
    By boostboy in forum Parts Wanted
    Replies: 0
    Last Post: 08-14-2006, 04:30 PM
  5. WTS: '87 Shelby Lancer, '88 Corporate lancer Shelby
    By "Top Fuel" Bender in forum Cars
    Replies: 34
    Last Post: 06-27-2006, 11:48 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •