As usual, every step of the way I have conflict. In the 1986 FSM, it lists two different sequences for torquing the 11mm head bolts on my T1 block. One is in Figure 8, and the other is in the text:

Figure 8:
1. 41 N-m
2. 61 N-m
3. 61 N-m
4. + 1/4 turn

Text, right underneath the figure:
1. 61 N-m
2. 88 N-m
3. 88 N-m
4. +1/4 turn

I am sure this is a known problem, but my search turned up nothing yet... so which one is it?

Thanks!

Derek