I have an 89 GTC with the big brakes. I need the proportioning valve. I don't know if there is a difference between years or not.
I have an 89 GTC with the big brakes. I need the proportioning valve. I don't know if there is a difference between years or not.
I have an 89 Daytona w/big brakes. Should be the same...
What does your P-valve look like?
CG
It's a brass colored prop valve with two lines going into the top from the MC, a line on each side going to the front brakes, and two lines on the bottom going to the rear brakes.
does it have a square colored tag on the prop valve? green, white, yellow........
I don't see a tag on it anywhere. However, I looked up the factory part number and it's 4485829.
it took me over a year to find a prop valve that would work, i drove around with my rear tires locking up in wet, dry, and snow...... it was fun and scary at the same time.
your part # should be stamped on it someplace...
for the record, my vnt shadow with solid rear disc had the green tag.... so your's probably should have a different one.
Originally Posted by 22mopar
Steve
'90 VNT competition package Shadow - T-III SC6262 conversion/restoration
'91 Spirit R/T - white
'91 Spirit R/T - white
'92 IROC R/T - red
'67 Barracuda 273 now, 440/727 awaits....
where did you find one at im having a hard time finding one