I have the fel-pro VS50205T gasket. It doesnt look like it will work, but Im not there to actually check it. I know this Shelby valve cover is a 4 peice, but it looks like this may possibly work?
Anyone used the 50205? It looks like its supposed to fit a stamped cover but idk. Its also fairly pricey.
I would buy the end pieces from Dodge and RTV it.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Using the incorrect 1 piece valve cover gasket for your 4 piece required shelby valve cover is the number 1 reason why so many shelby valve cover are broken.
Its not possible to be used. I wouldnt put it on if I thought it would hurt something. I wasnt home at the time and wondered is all. Got home, its not even remotely close.
Mostly overtightening them would be a big problem id say. One bolt on that thing was tightened retardedly and the others you could turn with your finger almost.
Originally Posted by turbovanman
+1! I bought the gasket and didn't use the cork crap just the rubber end pieces and a bunch of RTVnever had a problem keeping it sealed.
Posting Permissions
Reply With Quote