I was wondering if someone could confirm that these are the 10:1 Diamante Pistons:
DNJ/ROCK ENGINE COMPONENTS Part # P127
I got the part number from Rock Auto.
I was wondering if someone could confirm that these are the 10:1 Diamante Pistons:
DNJ/ROCK ENGINE COMPONENTS Part # P127
I got the part number from Rock Auto.
I see it says 72 on it. Its hard to tell about that dish. The diamante pistons have 2 valve reliefs on each side and I have no idea why, they are not the same like on a 4 valve either. I think the Diamante has the outline of the dish but no real depth in the dish. Maybe a pure flat top is slightly more then 10.0:1.
---------- Post added at 03:52 PM ---------- Previous post was at 03:50 PM ----------
http://www.turbo-mopar.com/forums/sh...ight=190%2C000
Looks like those are the ones. Here are OEM diamante pistons.
Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56
Thanks! Those pictures show pistons that appear to be very similar to the pistons I posted.