2dr L-body window regulator bushings.

[contraption22]

I took the pass door panel off my rampage to see where the slop in my window was comming from. I adjusted the slides at the top of the door and that helped alot. I noticed that there is a round tube around which the brakcet to the glass rides as it goes up and down. It looked liked there should have been a plastic bushing in there to take up the slack and keep this from rubbing metal to metal. I haven't taken off the passenger side yet to see if I am right, but there must have been a bushing there at one time.

Anybody know if these are still available, or the part number?

Thanks,

Mike

[PunKid]

Is it a round tube or more oval? and yea there should be a bushing there. Mine are destroyed so if you find a vender let me know

[plymouth]

I also own a page with window issues I wonder if that could be the problem, I have not yet ripped into the door to see if it has a bushing or even the remains of one.

[contraption22]

Omnipotentparts! Are you listening!

[135sohc]

pretty sure someone found a common plastic grommet bushing at the hardware store to fix this.

[contraption22]

pretty sure someone found a common plastic grommet bushing at the hardware store to fix this.

Awesome. Anybody know who this was?

---------- Post added at 12:40 PM ---------- Previous post was at 12:32 PM ----------

Found it.

http://www.turbo-mopar.com/forums/sh...hings&p=537321

[135sohc]

Edit: see you found it.