FS: Performance and Stock parts

[Directconnection]

{recent PRICE DROP as of 3-12-11}


Selling off a bit more of my 8v stuff to fund my T-III project


1) New Melling stock pump. Never ran, but was bolted/mocked up to my block from previous owner. $28 + shipping

2) New Mopar round tooth timing belt. Got it from FM a few years ago and is supposed to be a Mopar unit, but not sure how to verify other than the #s on it. $15 + shipping

3) 3" Westach analog EGT *and* Boost dual sweep gauge. This one is kinda really cool, and was rarely used by the previous owner. Bottom "sweep" reads EGTs up to 1800f and has 2 adjustable lights that you determine at what set point they light up for an alarm/warning. Top parts of the gauge sweep boost and reads from 30" of vacuum to 20psi boost. Gauge sweeps past 20 to probably close to 30psi if you wanted, but only reads up to 20. This unit sells for $135 and comes with a NEW $60 threaded K thermocouple probe with 48" of lead. Here's a url to their site of what this looks like: http://www.westach.com/gauge_images/3C86T14.jpg $99 + shipping

I also have a used, but in nice shape, Spearco 1080 front mount like FWD/TU sells that I am contemplating on selling, too... but that is it for the moment

[MNmopar]

Man, that guage is cool! It would look so sweet in the dash of a boosted 1950's pickup!

What do you want for the spearco out of curiosity?

[Directconnection]

Man, that guage is cool! It would look so sweet in the dash of a boosted 1950's pickup!

What do you want for the spearco out of curiosity?

Well, I paid $400 for it from Mark Shoaff (sp?) here before he got out of TMs 5 years ago, so I'd like to get that back out of it.... it all depends on what I replace it with if I do plan to sell as I'm looking at another model currently.

As for the gauge... I still like it more than others I see out there. You know you can get one 3" gauge from Westach with *4* individual EGT sweeps? If it read up to 30psi, I'd keep it still...

[csomni]

New MP Offset Cam Keys $35+ shipping , is it the complete set and whats the shipping going to be to 98908

[Directconnection]

New MP Offset Cam Keys $35+ shipping , is it the complete set and whats the shipping going to be to 98908

Yes, that is for the complete set. $5 for shipping USPS so that would be $40 total. I'll PM you my email if you wish to use paypal.

[Directconnection]

Bump and.... price drop! Make offers on everything

[Directconnection]

Bump on everything... prices ain't set in stone.

Take it all, or just a few as a lot and I'll make it worth your time as I really don't need 8v parts anymore.

[Directconnection]

Bump and price drops.... I need to feed my T-III!

[onerippinturbo2]

2) New Billet aluminum Relentless Performance actuator bracket for T-II style turbos. (this was a 2-piece prototype that I was raped for $50 back in the day.) $15 + shipping

steve, price shipping to 19403, let me know

[Directconnection]

2) New Billet aluminum Relentless Performance actuator bracket for T-II style turbos. (this was a 2-piece prototype that I was raped for $50 back in the day.) $15 + shipping

steve, price shipping to 19403, let me know

I'll use the USPS flat rate box which is like $5.50... so that would be $20.50 total to my paypal addy I'll be PMing ya.

[Juggy]

got pics of that? i got some freaky ars 2 piece wastegate setup i never seen both pieces billet AL....flat piece bolts to the stock comp housing. then there is an angled piece to mount then wastegate.

does this sound like what u gots?????

[Directconnection]

got pics of that? i got some freaky ars 2 piece wastegate setup i never seen both pieces billet AL....flat piece bolts to the stock comp housing. then there is an angled piece to mount then wastegate.

does this sound like what u gots?????

Kinda sounds like it.... I think. But I think it's the same one FWDP sells currently. The complete billet part bolts to the compressor housing with a recessed pocket area milled at an angle, then the mating section fits into that pocket so there's a positive protrusion "spacer" for the can to bolt to.

Hey Juggy.... buy my parts dude! You need that egt/boost gauge

[Directconnection]

Buy the belt, MP keepers and valve seals... make me an offer as I need them gone.

(same for the Westach dual boost/EGT gauge)

[5sp. mini]

ten bucks shiped on timing belt? is it for first years i have a 85. ?

[Directconnection]

ten bucks shiped on timing belt? is it for first years i have a 85. ?

Sorry, it's round tooth where your's is square tooth.

[5sp. mini]

ok thanks

[Juggy]

Kinda sounds like it.... I think. But I think it's the same one FWDP sells currently. The complete billet part bolts to the compressor housing with a recessed pocket area milled at an angle, then the mating section fits into that pocket so there's a positive protrusion "spacer" for the can to bolt to.

Hey Juggy.... buy my parts dude! You need that egt/boost gauge

yep sounds like it! altho mine is a TAD different. the recessed milled area is flat. and the spacer puck is milled on the angle.....maybe I do have the FWDP one....
yeah that westach guage price is nice!! i just have no need for 3" guage

ok thanks

PM me i have a few here i am not using, square toothers...like new....

bump for great seller!

[Directconnection]

Bump!

[Directconnection]

Just 3 items left.....

If you were on the fence for the Westach boost/EGT gauge and new probe, I'll throw in the new round tooth timing belt with it for the same price of $99 plus shipping.