I need to know what gap to run on the autolights. Out of the box they are at .21.
I need to know what gap to run on the autolights. Out of the box they are at .21.
Stock gap is .035". If you are running stock boost I'd go with that.
Brad, which Autolights? 63's? And I forget, does your CSX have an MSD (or other) box on it? Stock gap should be no problem with a strong ignition.
+1 to start with .035" if it works great, if too much boost and spark gets blown out try less.
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
I run a msd box. Autolight ar51 they come gaped at .21 out of the box. They are the back cut plugs. I have chaps gaped at .28 in the car now. Ranning a holset hx35 at around 18 for now but will b up around 25 psi later.
If the .28 works OK start there
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.