NICE! I see you named the files "coilovers" with different measurements. What's that all about and what worked best for you?
NICE! I see you named the files "coilovers" with different measurements. What's that all about and what worked best for you?
Great job Warren!! Just getting better better. Ya, all the times except the 1/4 look a bit screwy on the 1.2 60' run. The 1/8 has the same mph and both that and the 1000' are .5 quicker which if true should have carried into the 1/4 time.
Outstanding Warren!
Ran the omni at SDAC this year and figured I should post my results. It is the crappy gold one with the two gray doors. This run I had a perfect light too.
1984 --- Omni --- 2.5 T1 FMIC --- A520(350) --- 23x7x15 Slicks --- Jason Van Drehle --- 84omni --- --- 1.884 --- 8.759@77.56 --- 13.770@98.32
Frank Katzenberger
Squirrel Performance - Home of the best turbo calc!!!
http://www.squirrelpf.com
91 Daytona Shelby - It is getting there
87 Shelby CSX #418 - Near stock is a good thing!
94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top
"... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"
Visit the new Knowledge Center today!
Check out the one and only Shelby Dodge Registry!
AWESOME Warren! I think a 9.99 is doable too! and your mph gives me some hope that a better suspension will help my slug
Ya know, this reminds me of the 1.3 60' I once got... nobody said anything to me but was guessing I staged with the rear tires?Oh, and check out the run that shows a 1.20 short time, I'm not thinking that is legit, something went screwy with the timers or somethin on that run. The car did feel REAL strong on that pass but it just dont add up.
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Hey JT, What happened to the times data base? Did you break it?
best 1/8 ET-6.16 sec. best 1/8 speed-119.70 Best 1/4 MPH 145.5, Best 1/4 ET 9.65 sec. 8 valve NO NITROUS!!
Warren, damn,
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Yes, rod out both sides of the block.... LOL just kidding. should be up now!
I liked seeing yer Omni, the "crappy" ones are my favorite! Congrats on the time and the perfect light!
Times Page Updated! Check it out here!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Took the old Hoopty out again tonight. Wasn't as great as I wanted, but I need to work on holding the car back on the line to build more boost before the launch. Still on 7-8 lbs of boost.. Really need to get those 60's down.
1986 --- Omni GLH-t --- 2.2L Hybrid FMIC --- a413(3.77:1) --- 24.5x8.5 M&H Slicks --- Corby Lines --- ubmbass --- --- 1.999 --- 8.067 @ 91.10 --- 12.443 @ 112.35
Beat Clifford!!!
Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56
Moving in the right direction! A little more traction and boost and its in the 11's!
Times Page Updated! Check it out here!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Update:
86 Shelby Charger--- 2.5L T-II FMIC --- A523(3.77:1) --- 23x7.5 M&H Slicks --- Mike Skibbe (Skibbe) ---USA --- 1.844 --- 8.099 @ 86.25 --- 12.621 @ 108.61
I was there, I saw that sh*t
Times Page Updated! Check it out here!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
got another new best and busted into the 11's!!!!!!
I had a better 60' and a better 1/4mph but this run had everything that worked together!
85 GLH-T 2.5L T-II FMIC A555 3.50 OBX 23x8.5 M&H Slicks Jeff Mass (forcedfedmopar) 1.79 7.67@ 91.59 11.978 113.47
Awesome Jeff, congrats on the 11's!
Times Page Updated! Check it out here!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
1991---Dodge Spirit RT---2.2 TIII L2A---A568(3.85:1)---23.5x7.5 M&H Slicks---Eric Depenbrok---Expert Automotive---Depenbrok---USA---2.016---7.885@98.52---11.738@127.99
Sorry I don't know how to upload my timeslip
Nice work! Fast Spirit R/T there!
Times Page Updated! Check it out here!
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.