Valve Springs P4876061: does anybody have a new set of these kicking around they want to part with?
Valve Springs P4876061: does anybody have a new set of these kicking around they want to part with?
If those are the S60 springs, which I am guessing they are, I can get you new Comp versions, which are slightly stiffer for $70 plus shipping.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
The P4876061 springs are what were requested by the guy building my head. This is what I have is a N/A 2.2 race car. rules state stock only, but I'm pushing my luck and stepping it up a bit. I have a Comp cam 268H .460 lift (builders suggestion) I have a set of P4286813 springs he tried but he didn't like them and wanted the P4876061 set. which as you know are not available. So I thought I would see if any one had a set kicking around that they didn't need. I haven't talked to the builder yet about other alternatives. So what Springs do you have? comp: 985,942 ? I don't really dare try beehives. If tech pulls my valve cover they would spot those in a sec.
Thanks
Just get a set of Comp 942's. You can buy a set of 16 for the same price as the 061 springs used to go for. They are a better spring besides! Many of us have had 061 springs lose seat pressure. You head guy should know those springs are hardly the best available option these days. Most all of the spring companies make a spring for small block Mopars. That is in essence what the 061, & 942 spring is.
Todd