Hi All,
I have decided to bring my tubular K-frames to market. This design is what is currently on my Shadow. I built a jig with the ability to produce both L-body and also P,G,J,K frames as well.
L-body and P,G,J,K frames are being introduced at $825.00. I can discount each piece $40 when I have 4 or more orders due to tubing quantity breaks. I currently have 2 orders.
The re-design of the stock k-frame allows you to shed some weight while improving anti-lift geometry and the addition of some much needed caster. It uses the 89-up dual pivot lower control arms. It retains the stock mounting points for the steering rack and can be fitted with the bobble strut mount for those running the 525 or 555/568, just need to let me know which trans you are using.
If you wish to retain stock geometry and opt only for weight savings and the use of the dual pivot control arms, I can do this as well. The jig allows me to setup the k-frame with many possibilities.
This design does not currently use a sway bar for those looking for running one. That said, I am working on that and I may have a solution to this very soon. Feel free to ask any questions you may have here.