Need help I need a mopar mechanic in Tn

[85boostbox]

i would jump at that

[scarface1689]

Can't I have no money lol u still cool with Tony

[85boostbox]

yea talk to him about everyday

[scarface1689]

That's cool u think that fpr can cause all these things to go wrong on my car

[DodgeZ]

Looks like your vacuum lines aren't hooked up right. The line to the manifold should come in on the top. The center one should go to the wastegate and should have the orifice in it. If you can label the picture which solenoid goes to what on the picture. thanks

[85boostbox]

you dont think that you ahve the solenoids hooked up wrong do you. Like the wrong solenoid hooked up

[scarface1689]

How should they be hooked up dodgez I hooked them up exactly how they were hook up before how could u hook them up wrong

[DodgeZ]

How should they be hooked up dodgez I hooked them up exactly how they were hook up before how could u hook them up wrong

Looks like your vacuum lines aren't hooked up right for the wastegate. The line to the manifold should come in on the top. The center one should go to the wastegate and should have the orifice in it. If you can label the picture which solenoid goes to what on the picture. thanks

[DodgeZ]

When I read the vacuum diagram this is what I get. These should be the right solenoid. Someone correct me if I am wrong.

[85boostbox]

your right i get the same thing. Mikey looks like you have your solenoids hooked up and ran to the wrong locations

[scarface1689]

i hooked them up the way you drew in the picture dodgez and i will say one thing the car runs like hell now and idles better but still have the same amount of overboost
is there any way to test solenoids cause i just got these and while i believe the waste gate solenoid is working i wanna be sure

[DodgeZ]

runs like hell? runs like shat or runs fast?

unhook the power going to the wastegate solenoid. Run the car (idle). It should give you a code which will tell you which solenoid isn't working (because the power is unplugged). Post the codes after you do this.

[GLHS592]

Where in TN are you?

[scarface1689]

I am in Manchester tn

[scarface1689]

its got alot more power then what it did have fast wise i think it was because the map line somehow got hooked up to main vac source but they are all running correct

[scarface1689]

i get a code 36 and 55 dodgez

[DodgeZ]

that is good. flip the top and middle vacuum line.

[DodgeZ]

like this..

[scarface1689]

ok thanks dodgez will do it first thing in the morning

[scarface1689]

thanks dodgez this is the diagram that fixed my problem