Results 1 to 20 of 20

Thread: Parting out 88 Shelby Z. Brown interior

  1. #1
    Hybrid booster
    Join Date
    Oct 2006
    Location
    Kansas City KS
    Posts
    790

    Parting out 88 Shelby Z. Brown interior

    I will probably keep the 555.... and the longblock... just to get my GLHS moving under borrowed power until I can put it back together right...


    Other than that... LMK what you might need.... and make an offer...

    I have no need for the Rad/IC...

    It has brown interior... Front seats 'were' enthusiast seats... but they are pretty rough... The rest of the interior is there... some stuff better than others... Door panels and that stuff do look pretty good though...

    factory 'divorced' CD player (haven't checked it out yet)

    I have plenty of 6.5 crabs

    Or whatever...


    It is to rough to make a nice car out of... and I would prefer not to add to my already overgrown collection of TM junk... If that makes any sense



    I live in the Kansas City area.

  2. #2
    Hybrid booster
    Join Date
    Nov 2008
    Location
    South West Washington State
    Posts
    965

    Re: Parting out 88 Shelby Z. Brown interior

    Interior pics? Leather or cloth?

  3. #3
    turbo addict
    Join Date
    Dec 2005
    Location
    Malta, IL
    Posts
    3,061

    Re: Parting out 88 Shelby Z. Brown interior

    how much you thinking for just the cd player untested but with cable included?

  4. #4
    Hybrid booster Turbo Mopar Contributor
    Join Date
    Jan 2009
    Location
    quebec (canada )
    Posts
    755

    Re: Parting out 88 Shelby Z. Brown interior

    engine + dash wiring ? lmk

  5. #5
    Hybrid booster
    Join Date
    Oct 2006
    Location
    Kansas City KS
    Posts
    790

    Re: Parting out 88 Shelby Z. Brown interior

    Leather interior.. the seats are rough.. but the rest is there...


    Dash wiring will be available... I think the under hood stuff is spoken for.. but not sure yet..


    And just PM me offers for what you need... Somebody mentioned I wasn't going to be able to retire off what the CD player was worth in the thread I started about it... So I am not going to try on any of the parts really... It would be nice to get some of my change back in my pocket.. but whatever... I don't want the junk here... and I don't want it crushed either... In fact I probably wont crush it... and instead pile it here... and then I will never be able to find it..


    I need a 87 LM and a 255pph fuel pump.. and a turbo to support roughly 300 to 350 HP... (thinking holset HCI or HX35).. You know.. the typical stuff... So partial or full trades wither direction would be welcomed also.


    So long story short... This is a busy time of the year for me... (Christmas lighting business) but I will have pix up later today... and next Friday after turkey day will have time to pull parts..


    Let me know whatever you need is worth... and if you could come close to figuring your own shipping from 66109 it would help

    No reasonable offer is going to be refused....

  6. #6
    Hybrid booster
    Join Date
    Jul 2008
    Location
    Valley Stream NY
    Posts
    275

    Re: Parting out 88 Shelby Z. Brown interior

    if it's a hardtop I'd could use the weather strips from the doors and the window scrapers if they're in good shape, I'll also take the antenna if you have it.

  7. #7
    Hybrid booster
    Join Date
    Oct 2006
    Location
    Kansas City KS
    Posts
    790

    Re: Parting out 88 Shelby Z. Brown interior

    The window scrapers are shot... Maybe some of the door stuff is alright...



    Here are some pix..









  8. #8
    Hybrid booster
    Join Date
    Jul 2008
    Location
    Valley Stream NY
    Posts
    275

    Re: Parting out 88 Shelby Z. Brown interior

    sorry I was a bit vauge looking at my prior post. I mean the weatherstrip that is on the door that the window rides in, around the sides and the top. Scrapers are shot, oh well, what about the antenna - still there?

  9. #9
    turbo addict TopDollar69's Avatar
    Join Date
    Dec 2005
    Location
    Ozark, Mo
    Posts
    2,644

    Re: Parting out 88 Shelby Z. Brown interior

    I'll give you $20 for the tape player and all 6 Infinity speakers.
    84 Laser XE TII A555 89 Caravan SE TIV A568

  10. #10
    turbo addict
    Join Date
    Dec 2005
    Location
    Spokane, Wa
    Posts
    9,046

    Re: Parting out 88 Shelby Z. Brown interior

    wish you were closer, I'd love to have the door panels.

  11. #11
    Hybrid booster
    Join Date
    Oct 2006
    Location
    Kansas City KS
    Posts
    790

    Re: Parting out 88 Shelby Z. Brown interior

    Sorry about posting this and not having the time to mess with it... I have a Christmas lighting Business that is thankfully doing very well for the next week or so.... and thanks to a nasty cold I lost one of my key guys... and the business has required more of my time than I had planned...


    Please be patient... In a about a week things will be under control and I will have all the time in the world...

  12. #12
    Garrett booster
    Join Date
    Jun 2009
    Location
    Bluffton, SC
    Posts
    81

    Re: Parting out 88 Shelby Z. Brown interior

    Do you have the Boost gauge and connectors? $$ and cost to ship to 29910?

  13. #13
    Hybrid booster
    Join Date
    Oct 2006
    Location
    Kansas City KS
    Posts
    790

    Re: Parting out 88 Shelby Z. Brown interior

    Ok...

    This car is coming APART...

    I love taking them apart...



    One of those stupid trim pieces around the door handles still has 5 tabs intact.


    Dash is out...(not sold) and I am taking it apart bit by bit...



    The engine is spoken for...(I have lots of spare parts around though so feel free to ask for little stuff) and the SMEC and engine harness is already getting thinned out, and getting fitted to my Dune Buggy..


    The Tranny is "available' but I think I may want to keep it... but who knows.. I do have an extra 555 with a bad third gear syncro and a 520 with a good one... and a 3.50 diff... So..... Whatever...

    I think the CD player and radio... are spoken for...


    And the Chin spoiler is rough... and split...

  14. #14
    turbo addict
    Join Date
    Nov 2008
    Location
    Plainfield, Illinois
    Posts
    2,887

    Re: Parting out 88 Shelby Z. Brown interior

    i got a buddy who needs the shifter, shifter cables and clutch cable....
    and any other various 5 speed conversion parts you would like to get rid of
    i know he also would like the 555 if you decide to part with it

  15. #15
    Hybrid booster
    Join Date
    Oct 2006
    Location
    Kansas City KS
    Posts
    790

    Re: Parting out 88 Shelby Z. Brown interior

    Alright...


    Somebody seriously needs to come get this shell... It was a TX car... and is rust free... seriously... it is perfect...



    Right now it is sitting just outside my shop nekid.. The only thing left bolted to the car is the rear suspension... which... interestingly enough.. makes the car light to just pick up the front and wheel it around like a giant wheelbarrow...



    So seriously... I am looking at the three complete daytonas I have here... all of them have some rust at some level except this car... and this is the one that got parted... duh...


    The VIN comes back clean... I just don't have a title....


    But seriously...


    This thing is perfectly rust free....


    Even my dad... Who doesn't ever break any rules for any reason was trying to firgue out why if you were going to cut the floor out the the VNT and this car and swap them... why it wouldn't make more sense to just.. well... Geez... I can't believe...


    Well whatever...



    Anybody need a perfectly rust free "body in white", before I do something silly...

    Come on... you know it has to be nice if I wouldn't touch it with the sawzall.... the trailor with half a load of scrap metal was feet way.. fresh blade chucked up... and I couldn't do may favorite part... you know it has to be nice...

  16. #16
    turbo addict looneytuner's Avatar
    Join Date
    Dec 2005
    Location
    Maryland Heights, Mo. St. Loui
    Posts
    1,582

    Re: Parting out 88 Shelby Z. Brown interior

    I need the drivers seat belt.

    And are you the one with the Rudolph on the front of your truck??????

  17. #17
    Hybrid booster
    Join Date
    Oct 2006
    Location
    Kansas City KS
    Posts
    790

    Re: Parting out 88 Shelby Z. Brown interior

    Yep... The Rudolph Van is mine.... That is so much fun...



    and I will check on the drivers belt... I remember pulling it... and I think it was worn...

  18. #18
    turbo addict looneytuner's Avatar
    Join Date
    Dec 2005
    Location
    Maryland Heights, Mo. St. Loui
    Posts
    1,582

    Re: Parting out 88 Shelby Z. Brown interior

    Quote Originally Posted by vipernbox View Post
    Yep... The Rudolph Van is mine.... That is so much fun...



    and I will check on the drivers belt... I remember pulling it... and I think it was worn...
    Mine is frayed 1/2 way through.

    You want the 86 GTS back that you delivered to Union Star? FREE!

  19. #19
    Hybrid booster
    Join Date
    Oct 2006
    Location
    Kansas City KS
    Posts
    790

    Re: Parting out 88 Shelby Z. Brown interior

    No not really... But thanks though... Are you the guy that I dropped it off to?


    That old chevy van... that was the rudolph mobile at the time... It puked up the transmission on my way to Hamilton MO just after I left that house... I spent the week in Hamilton at a buddies house while it was rebuilt...

    What a deal that was...

  20. #20
    Hybrid booster
    Join Date
    Apr 2010
    Location
    yakima wa
    Posts
    484

    Re: Parting out 88 Shelby Z. Brown interior

    Quote Originally Posted by vipernbox View Post
    Ok...

    This car is coming APART...

    I love taking them apart...



    One of those stupid trim pieces around the door handles still has 5 tabs intact.


    Dash is out...(not sold) and I am taking it apart bit by bit...



    The engine is spoken for...(I have lots of spare parts around though so feel free to ask for little stuff) and the SMEC and engine harness is already getting thinned out, and getting fitted to my Dune Buggy..


    The Tranny is "available' but I think I may want to keep it... but who knows.. I do have an extra 555 with a bad third gear syncro and a 520 with a good one... and a 3.50 diff... So..... Whatever...

    I think the CD player and radio... are spoken for...


    And the Chin spoiler is rough... and split...
    how much do want for this (stupid trim pieces around the door handles still has 5 tabs ) pm me

Similar Threads

  1. General Parting out 1986 Shelby Charger
    By just_a_zoo in forum Parts For Sale
    Replies: 30
    Last Post: 02-03-2012, 06:37 PM
  2. General Parting 89 Daytona Shelby in NJ
    By Bob the Medic in forum Parts For Sale
    Replies: 34
    Last Post: 04-15-2011, 11:51 AM
  3. General Parting 89 Daytona Shelby T-Top
    By Bob the Medic in forum Parts For Sale
    Replies: 2
    Last Post: 07-08-2010, 04:37 PM
  4. Shelby Turbo Package for Mustangs
    By contraption22 in forum Other vehicles
    Replies: 8
    Last Post: 01-05-2010, 10:40 AM
  5. Interior Shelby Charger Interior Panels
    By 1984rampage in forum Parts Wanted
    Replies: 13
    Last Post: 12-23-2009, 05:01 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •