Page 2 of 2 FirstFirst 12
Results 21 to 34 of 34

Thread: New Super 60 Engine, Trans, etc.

  1. #21
    Garrett booster
    Join Date
    Dec 2010
    Location
    Hudson Valley, NY
    Posts
    196

    Re: New Super 60 Engine, Trans, etc.

    List is finally up to date. I lowered some prices as well. My apologies to anyone who missed out, I've been so swamped, I only recently took a break to eat. I skipped breakfast and lunch! It's OK though, as I could stand to lose a few pounds . Thanks to everyone so far for their purchases and their patience! Ready for round 2!

  2. #22
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,701

    Re: New Super 60 Engine, Trans, etc.

    Quote Originally Posted by mr.ed View Post
    6031594 - O-Ring, Distributor - 4 Available - $1/ea
    NPN----- - Spring, G-Body Front Heavy Duty - Set of 2 - $20
    4147892 - Spring, G-Body Rear Heavy Duty - Set of 2 - $20
    Wow, you've been busy! Interested in the above... those are the -1 inch springs or the +1 inch springs?

    Also, I didnt look at the pictures yet, what comp cover is on the Turbo T04 B or E?

    Thanks.

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  3. #23
    Garrett booster
    Join Date
    Aug 2009
    Location
    Brookfield IL
    Posts
    128

    Re: New Super 60 Engine, Trans, etc.

    Quote Originally Posted by BadAssPerformance View Post
    Wow, you've been busy! Interested in the above... those are the -1 inch springs or the +1 inch springs?

    Also, I didnt look at the pictures yet, what comp cover is on the Turbo T04 B or E?

    Thanks.
    I think its a B JT.

  4. #24
    Slugmobile & MeanMini Caretaker Turbo Mopar Contributor wheming's Avatar
    Join Date
    Nov 2010
    Location
    Raleigh Area, NC
    Posts
    4,810

    Re: New Super 60 Engine, Trans, etc.

    Quote Originally Posted by mr.ed View Post
    If someone else asks for them I'll contact you first and give you a chance to buy them. If you decline at that time, I'll have to sell them to the next buyer. Sound fair?

    Each arm comes complete with bushings, ball joint and boot, ready to bolt in!

    Shipping should be around $20.

    I'll just take them, i could always have spares for my Spirit.
    I'll also take (2) 4684643 strut mount/bearing

    I'll PM you my paypal if you could send me an invoice.


    And to Cindy and the other reply,
    I only deal with Johnny at PolyBushings for all my bushing needs. But the bushings I bought don't fit snug. He is working with me to find out what is different about these stamped arms, but thought using these arms with poly bushings from him might be easier to sort out.
    Thanks for the suggestions though!
    Wayne H.

    '91 Dodge Spirit ES 2.5L turbo 5spd
    '05 PT GT 2.4T HO autostick (RIP)
    '89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
    '89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
    MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
    and other cars, trucks and motorcycles
    https://www.youtube.com/user/SlugmobileMeanMini

  5. #25
    Garrett booster
    Join Date
    Dec 2010
    Location
    Hudson Valley, NY
    Posts
    196

    Re: New Super 60 Engine, Trans, etc.

    Quote Originally Posted by turbovanman View Post
    Crap.

    No, the front and rear seals and might as well take the fuel filter too. Thanks.




    4443455 - Filter, Fuel - $5
    4275317 - Clip, Fuel Injector - Set of 4 - $5
    5212535 - Seal, Wheel Bearing - 2 Available - $5/ea
    NPN----- - Seal, Crankshaft Front - $5
    6031594 - O-Ring, Distributor - 4 Available - $1/ea
    5203530 - Seal, Crankshaft Rear - $5
    Only the fuel filter left, sorry! Sent you a PM.

  6. #26
    Garrett booster
    Join Date
    Dec 2010
    Location
    Hudson Valley, NY
    Posts
    196

    Re: New Super 60 Engine, Trans, etc.

    Quote Originally Posted by BadAssPerformance View Post
    Wow, you've been busy!
    Yeah, no kidding! It's great, though!

    Quote Originally Posted by BadAssPerformance View Post
    Interested in the above... those are the -1 inch springs or the +1 inch springs?
    Neither, they're not the MP springs but HD factory replacements.

    Quote Originally Posted by BadAssPerformance View Post
    Also, I didnt look at the pictures yet, what comp cover is on the Turbo T04 B or E?
    Thanks.
    My invoice from Turbonetics says TO4 B

  7. #27
    Slugmobile & MeanMini Caretaker Turbo Mopar Contributor wheming's Avatar
    Join Date
    Nov 2010
    Location
    Raleigh Area, NC
    Posts
    4,810

    Re: New Super 60 Engine, Trans, etc.

    those cast control arms are for AA body right? I had a hard time finding anything other than years used 91-95.
    Thanks.
    Wayne H.

    '91 Dodge Spirit ES 2.5L turbo 5spd
    '05 PT GT 2.4T HO autostick (RIP)
    '89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
    '89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
    MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
    and other cars, trucks and motorcycles
    https://www.youtube.com/user/SlugmobileMeanMini

  8. #28
    Garrett booster
    Join Date
    Dec 2010
    Location
    Hudson Valley, NY
    Posts
    196

    Re: New Super 60 Engine, Trans, etc.

    Shorter list. Here's what's left:

    Part Number Description Price
    4483477 - Turbo 2 Short Block, O-Ringed , Disassembled, Missing Crank - $600
    P5249331 - MP Intercooler - $200
    4343481 - Manifold, Exhaust - Turbo 2 - $50
    4621172 - Pump, Water - $30
    5203325 - Retainer, Intermediate Shaft Seal - $20
    4483162 - Pulley, Water Pump - $5
    NPN----- - Lifter, Hydraulic - Set of 8 - $40
    4671130 - Starter w/heat shield & clip - $80
    4720822 - U-joint Kit, 5212991 Yoke, 5212992 Shaft, - $140
    4641172 - Joint Kit, Outer CV w/boot - Sprit R/T - 2 Available - $75/ea
    4641177 - Inner CV Assy. & Boot Pkg. - Spirit R/T - 2 Available - $75/ea
    5212711 - Tripod, 5212740 Spring - $20
    5277873 - Hose Intercooler, Spirit R/T - $50
    5227333 - Solenoid Assy. - $50
    4275317 - Clip, Fuel Injector - Set of 4 - $5 shipped
    5212535 - Seal, Wheel Bearing - 2 Available - $5/ea
    6031594 - O-Ring, Distributor - 2 Available - $1/ea
    TB000153 - Belt, Timing - $10
    4343946 - Belt, Timing - $10
    NPN----- - Bearing, Oil Pump/Distributor Intermediate Shaft - $60
    4670220 - Shifter Assy. Neon? - $75
    4437511 - Cable, Speedometer - $15
    4449052 - Knuckle, Steering R w/bolt in bearing/hub for BIG BRAKES! - $90
    4449053 - Knuckle, Steering L w/bolt in bearing/hub for BIG BRAKES! - $90
    NPN----- - Garrett TO4B Stage 3 Turbo modified by Turbonetics - should support up to 550HP $800
    RO400203 - Mopar Reman Steeing Rack, Firm Feel - $100
    Last edited by mr.ed; 12-14-2010 at 02:39 PM.

  9. #29
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: New Super 60 Engine, Trans, etc.

    Quote Originally Posted by wheming View Post
    those cast control arms are for AA body right? I had a hard time finding anything other than years used 91-95.
    Thanks.
    Those will fit ANY TM from 91-95.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  10. #30
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: New Super 60 Engine, Trans, etc.

    Got pics of the inner cv joints?
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  11. #31
    Garrett booster
    Join Date
    Dec 2010
    Location
    Hudson Valley, NY
    Posts
    196

    Re: New Super 60 Engine, Trans, etc.

    Quote Originally Posted by turbovanman View Post
    Got pics of the inner cv joints?
    Comin' right up!

  12. #32
    Garrett booster
    Join Date
    Dec 2010
    Location
    Hudson Valley, NY
    Posts
    196

    Re: New Super 60 Engine, Trans, etc.

    4641177 - Inner CV Joint Kit
    $75/ea. Spirit R/T Inner joint comes with tripod, spring, cup, snap ring, boot, clamps and grease - some assembly required (batteries not included)


    4641172 - Outer CV Joint Kit
    $75/ea. Also for Spirit R/T comes with boot, clamps and grease


    4720822 -U-joint Kit
    5212991 -Yoke
    5212992 - Shaft
    $140 for all three. Again, Spirit R/T pieces, everything you need to build your very own intermediate shaft


    4504007 - Bracket
    5212932 - Bearing
    5212962 - Slinger
    5212975 - Slinger
    5212964 - Seal
    6101299 - Screw
    6500158 - Screw
    SOLD. You guessed it! Spirit R/T parts, intermediate shaft support bracket, bolts, bearing, etc. - BTW, bearing is made in Italy . Just thought you'd like to know.
    Last edited by mr.ed; 12-08-2010 at 11:02 AM.

  13. #33
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,701

    Re: New Super 60 Engine, Trans, etc.

    Quote Originally Posted by mr.ed View Post
    Yeah, no kidding! It's great, though!

    Neither, they're not the MP springs but HD factory replacements.
    Interesting, didnt know they made those, I wonder if they have the same or different spring rates?

    My invoice from Turbonetics says TO4 B
    The note you posted was refering to the comp wheel being a Super S which is a "B" wheel, but the picture posted shows a T03 cover. Good and bad to this... good cuz it looks stock and everything fits stock, bad cuz the larger 04housings run cooler at higher boost. Regardless, a great deal for the price


    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  14. #34
    Garrett booster
    Join Date
    Dec 2010
    Location
    Hudson Valley, NY
    Posts
    196

    Re: New Super 60 Engine, Trans, etc.

    Quote Originally Posted by BadAssPerformance View Post
    Interesting, didnt know they made those, I wonder if they have the same or different spring rates?
    I have no idea what the rates are. These had a tag with "HD" and the last 3 of the part number on them. I had Mopar springs tagged "XHD" on my 'Tona.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. General Complete NEW Super 60 powertrain - $4,000
    By mr.ed in forum Parts For Sale
    Replies: 15
    Last Post: 12-06-2010, 07:24 PM
  2. General 3.0l engine, trans, turbos P-body and few neon parts
    By dodgeshadowchik in forum Parts For Sale
    Replies: 5
    Last Post: 04-14-2009, 02:26 PM
  3. Hybrid Trans Build
    By TurboGLH in forum Old FAQ Info
    Replies: 0
    Last Post: 12-20-2005, 09:47 PM
  4. SMEC Fault Codes
    By Frank in forum Old FAQ Info
    Replies: 0
    Last Post: 12-17-2005, 02:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •