took my 91 spirit rt to the dyno tonite
results are in, 304 hp and 312 tq @ 20psi to the wheels on a slipping clutch! not terrible.
Done on 91octane and through FULL street trim. i didnt open the cut out or change boost ect.
t3/t4, FMIC, +40s, walbro, FWD stage 5 ECU, the rest of the supporting mods.
Nice! Now get a clutch, LOL
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
I would say open the dang cutout but it would have blown your clutch out a lot worse.
Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56
Wow! Im impressed! Very good numbers.
Thanks guys. The rest of the guys in the mopar group were quite impressed. I beat several 5.7 hemi chargers with intake/exhaust/tuner mods. also a 5.9 dakota with heads, intake, bored over, exhaust, tuner, ect. Even the Dyno guy said he wouldnt have expected it.
This winter ill get a clutch in it and go back with 25psi. go for the 350+ mark
Nice numbers! I can't wait to run ya this spring.
“If the people of the nation understood our banking and monetary system, I believe there would be a revolution before tomorrow morning.” -Henry Ford
sounds like my mods...
Bill Baker
NESDAC Pres.
Rutland,Vermont
90 Shadow VNT comp 332WHP/390WTQ
12.26@116MPH-27psi (SOLD)
89 CSX #269 59k
83 Rampage T3 11.78@118MPH- 22psi
Nice numbers for sure,
What size turbo? T3/T4 doesn't tell much,
Thought you had cams? or did you put stockers back in.Originally Posted by 30 PSI SHADOW
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
lol its been soo long that i almost cant remember what i put in this car. i think its a 50 trim with stage 2 wheels. Got it from FWD about 4-5 years ago. I also have FWD stage 1 cams. forgot about that too until TVM mentioned it. HAHA. i need to write this stuff down somewhere!
NICE! I put down similar numbers with my Spirit. I believe it was 33X with the 50trim @ 25psi. I didnt have cams.
Carroll
SILVER, 85 GLH-R/T, TIII powered, Fueltech, ID1300's. PTE5857
RED, 91 Spirit R/T - Holset HE351 - 12.6 @ 107...R.I.P.
stage 2 cams but they are not dialed in..
Bill Baker
NESDAC Pres.
Rutland,Vermont
90 Shadow VNT comp 332WHP/390WTQ
12.26@116MPH-27psi (SOLD)
89 CSX #269 59k
83 Rampage T3 11.78@118MPH- 22psi
either are cams. I just bolted up the stock gears, upgraded the fuel system, threw a turbo on and this is what happened. This is the first time ive dyno'd this car. Its been together for 4-5 years now. Im happy with the results.
Posting Permissions
Reply With Quote
