Results 1 to 9 of 9

Thread: Eagle Rods, a568 blak trax, Drag radials, etc

  1. #1
    Garrett booster
    Join Date
    Feb 2008
    Location
    Madison, WI
    Posts
    120

    Eagle Rods, a568 blak trax, Drag radials, etc

    Here's the last of my parts from the garage cleanout. All prices are obo.

    Eagle H beam rods. Used for maybe 3k miles in the van. .901 pin with arp 2000 rod bolts. $300 shipped


    Set of et street drag radials that I mounted while I was about to replace what I thought was a hg failure but turned out the engine was toast. These have maybe 100 ft of rolling the van on them. There's still residue from the stickers being peeled of. They are 215/60/14 size. Still on steel rims or I can take them off the wheels. $300 shipped


    A568 Trans from a van. The van had around 150k on it. I pulled the trans apart a couple years ago expecting to need some parts but everything was in excellent condition. I doubt it's ever been rebuilt but I would assume it's led an easy life. It has the omni potent Blak Trax unit in it with upgraded springs and the lathed spider gears. SOLD


    Turbo Valve cover in decent shape $30 shipped


    Modified factory 1 piece rail to use a 3/8npt feed line. Has bosch adj regulator and comes with -6 fittings on feed and return lines. $60 shipped


    Stock sized valves, no flow data on it, it does look to have some very nice porting done to the intake and exhaust as well as the combustion chamber. 061 springs installed.

    This is the head I blew the passenger side out of through the dowel pin. I rewelded and surfaced the head but the dowel hole is poorly done to be honest. I ended up using a shortened dowel pin to hold the head gasket then carefully placing the head down and lining up the bolt holes to locate it.

    It sealed up just fine for several months until I removed the head for a different one.

    The head also looks like it's been resurfaced several times already. $120 shipped


    Set of 4 injectors from an rx7. Low impedance. Actually flow closer to 700cc/min $160 shipped


    RC Engineering 750 cc/min high impedance fuel injectors. Less than 1k miles on these. Don't have any need for them anymore set of 4 flow matched injectors from RC. $300 shipped


    PM me with any questions or post here. I'll get pictures of everything on sunday when I'm out by the storage area so if you've got a request let me know!
    Last edited by Kevin; 12-07-2010 at 03:03 AM.

  2. #2
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,179

    Re: Eagle Rods, a568 blak trax, Drag radials, etc

    pm sent on the 568.

  3. #3
    Hybrid booster Turbo Mopar Contributor
    Join Date
    Jan 2008
    Location
    San Pedro, California
    Posts
    305

    Re: Eagle Rods, a568 blak trax, Drag radials, etc

    I'll take the tranny if he doesnt and give you 20 more to help the shipping

  4. #4
    Garrett booster
    Join Date
    Feb 2008
    Location
    Madison, WI
    Posts
    120

    Re: Eagle Rods, a568 blak trax, Drag radials, etc

    Trans sold pending payment!

  5. #5
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanman²'s Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Eagle Rods, a568 blak trax, Drag radials, etc

    Got pics of the fuel rail Kevin? Thanks.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  6. #6
    Garrett booster
    Join Date
    Feb 2008
    Location
    Madison, WI
    Posts
    120

    Re: Eagle Rods, a568 blak trax, Drag radials, etc

    Here's the fuel rail. This from my old for sale thread. I can get more if you'd like.


  7. #7
    Garrett booster
    Join Date
    Aug 2006
    Location
    Sparks, NV
    Posts
    179

    Re: Eagle Rods, a568 blak trax, Drag radials, etc

    Trans?

  8. #8
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,179

    Re: Eagle Rods, a568 blak trax, Drag radials, etc

    Quote Originally Posted by Dr.Evil View Post
    Trans?
    sold

  9. #9
    Garrett booster
    Join Date
    Feb 2008
    Location
    Madison, WI
    Posts
    120

    Re: Eagle Rods, a568 blak trax, Drag radials, etc

    Transmission shipped, more stuff to go.

Similar Threads

  1. Wheels/Tires Drag Radials and Potenzas on neon R/T rims
    By shackwrrr in forum Parts For Sale
    Replies: 1
    Last Post: 08-21-2010, 01:04 AM
  2. Engine 2.5L Ross Pistons and Eagle H-Beam Rods...
    By Frank in forum Parts For Sale
    Replies: 17
    Last Post: 09-10-2008, 10:29 AM
  3. New Product ~ OMNI-Potent’s Blak Trax Limited Slip Differential Kit
    By OMNI-Potent in forum General Vendor Area
    Replies: 23
    Last Post: 03-31-2007, 03:43 PM
  4. FS: Slicks & Drag Radials
    By Cliff Ramsdell in forum Parts For Sale
    Replies: 1
    Last Post: 07-22-2006, 07:42 PM
  5. What's the best drag radials for traction?
    By Reeves in forum Suspension, Brakes, Wheels, Traction
    Replies: 73
    Last Post: 07-11-2006, 07:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •